IMISCELLANEOUS
1. Operating Cautions
I
1.If there is no blank area or a solid image area on the leading edge of the original, create a blank area because the paper may wrap around the drum or the paper eject pawl may become dirty and cause black line on prints.
2.When the paper is curled, stack the paper with the curl face down, otherwise the paper may wrap around the drum or stains may appear.
3.Make sure to make a few trial prints to check the image position be- cause the image position of the trial print may not correspond with that of the original.
4.If the image registration is not consistent, set the printing speed slower than step 3.
5.The leading edge of the prints may become stained if the edge touches the image of prints on the paper delivery table.
6.In case of duplex or multicolor printing, leave the printed paper for a while before the next printing in order to dry the ink on the printed paper. If this is not done, feed roller marks will appear on the print image.
7.If the machine is not used for a long period, the image density may decrease because the ink on the drum may dry. Make extra prints until the image density recovers.
8.When the machine is used in IOW temperature conditions, the image density may decrease. In this case, decrease the printing speed (1 or 2 steps).
9.The ink of the print on the paper delivery table may stick to the back side of the next print.
54