Ricoh 1013F manual Non-recommended Paper

Page 25

Copy Paper

Important

❒Use of damp or curled paper may cause a misfeed. If a misfeed occurs, try turning over the paper stack in the paper tray. If there is no improvement, change to copy paper with less curl.

Note

1

❒Postcards should be fed from the bypass tray.

❒When printing on envelopes, note the following:

•Load envelopes with the copy side face down on the bypass tray.

•Check that envelope flaps are securely folded up.

•Make sure that there is no air between envelopes.

•Load only envelopes of the same size and type at the same time.

•Before loading envelopes, flatten the leading edge (the side being fed into the machine) by running a pencil or ruler across them.

•Use only rectangular envelopes.

❒If you load paper of the same size and in the same direction in two trays, the machine automatically switches to another tray when the tray in use runs out of paper. This function is called Auto Tray Switch. This saves interrupting a copy run to replenish paper even when you make a large number of copies. You can cancel this setting. The optional paper tray unit is required to use this setting. See “10Auto Tray Switch” of the System Settings manual.

Reference

If you want to add paper, see p.42 “ hLoading Paper”.

If you want to change the paper size, see p.48 “Changing the Paper Size”.

Non-recommended Paper

RCAUTION:

•Do not use aluminum foil, carbon paper, or similar conductive paper to avoid a fire or equipment failure.

Important

❒Do not use any of the following kinds of paper or a fault might occur.

•Thermal fax paper

•Art paper

•Aluminum foil

•Carbon paper

•Conductive paper

❒Do not use copy paper that has been already copied on. Otherwise, a paper misfeed might occur.

13

Image 25

Contents 1013/1013F Means Power ON. c means Stand by Safety During Operation Safety InformationPage Positions of Labels and Hallmarks for Rwarning and Rcaution Symbols How to Read this ManualMachine Types What You Can Do with This Machine Table of Contents Troubleshooting Specifications Page Guide to Components Operation switch On indicatorControl panel Bypass trayPaper tray unit OptionsControl Panel Copier only Fax and/or printer installedDial Function keys Fax in- stalled machine only Fax function keys Fax installed machine onlyPrinter function keys Printer in- stalled machine only Number keysDisplays and Key Operations Panel DisplayCopy display Common keysTurning On the Main Power Turning On the PowerOperation switch right side of the control panel Main power switch left side of the machinePress the operation switch to make the On indicator go on Turning Off the Main PowerTurn off the main power switch Starting the MachineChanging Modes Metric version Originals Inch version Non-recommended originals for the document feeder ADFExposure glass Document feeder ADF Original Sizes and Scanning Area/Missing Image AreaRecommended Paper Sizes and Types Copy PaperNon-recommended Paper Paper Storage Toner Storage TonerUsed Toner Basics Make sure that the machine is in Copy mode Basic ProcedurePlace your originals Press the Start keyAuto Off Placing Originals on Exposure Glass Placing OriginalsPlacing Standard Size Originals Loading Originals Document Feeder ADFLimit mark Document guide Placing Custom Size Originals You can also enter this mode by pressing the R/# key Selecting an Original Type Basic FunctionsText PhotoSelecting Copy Paper Sort SortSort After all originals are scanned, press the R/# key Enter the number of copy sets with the number keysCopying from the Bypass Tray Push down the paper guide re- lease lever When copying onto OHP transparenciesWhen copying onto custom size copy paper When copying onto standard size paperPress the R/# key When copying onto envelopes Other Functions Setting the User CodeUser Codes Auto StartPress the Reduce/Enlarge key Preset Reduce/EnlargePress the OK key Place your originals, and then press the Start key Press the Zoom key Enter the ratio ZoomEnter the desired reproduction ratios with the 0 or 1 key Enter the desired ratio with the number keysPortrait K originals CombineLandscape L originals Load your originals, and then press the Start key Select with the 0 or 1 key, and then press the OK keyFollowing shows the combinations of functions Combination ChartCopying General Machine Operation ProblemsDisplay Cannot Make Clear Copies Combine Cannot Make Desired CopiesLoading paper in the optional paper tray unit HLoading PaperPush the paper tray in until it stops Readjust the back fence and side fences Regarding toner storage, see p.15 Toner Storage HChanging the Toner CartridgeHChanging the Toner Cartridge HClearing Misfeeds HClearing Misfeeds Changing the Paper Size Adjust the back fencePaper Tray Square the paper and load it in the tray Adjust the side and back fences to the new paper sizePush the paper tray in until it stops Selecting the Paper Size with the User Tools When you have selected Custom Size on step ETroubleshooting Accessing the User Tools Copier Features User Tools Copier FeaturesExiting the User Tools User Tools Menu Copier Features Copier Features Settings You Can Change with the User ToolsMenu Description User Tools Copier Features Dos and Donts RemarksMachine Environment Where to Put Your MachineOptimum environmental conditions Environments to avoidPower Connection Access to Machine Maintaining Your Machine Cleaning the machineRemarks Mainframe Non-reproduction area Copy paper weightFirst copy time Copying speedDimensions W ⋅ D ⋅ H up to exposure glass Power consumptionWeight Noise Emission *1Document Feeder ADF Option for Type Available paper size Paper Tray Unit OptionPaper capacity Memory capacity 32MB Copier Memory Unit OptionAdditional functions Number of originals that can be stored about 99 pagesIndex Toner User Codes, 31 User Tools Ventilation hole Zoom Memo AE AE B045