Samsung SCX-4300 manual Paper size supported in each mode, Type Size Dimensions Weighta Capacityb

Type	Size	Dimensions	Weighta	Capacityb
Envelope	Envelope C6	114 x 162 mm	60 to 90	1 sheet of
(continued)		(4.48 x 6.37	g/m2 (16 to	paper for
		inches)	24 lb)	the manual
				feeder
Transparency	Letter, A4	Refer to the Plain	138 to 148	1 sheet of
		paper section	g/m2	paper for
				the manual
				feeder
Labels	Letter, Legal,	Refer to the Plain	120 to 150	1 sheet of
	Folio, A4, JIS	paper section	g/m2 (32 to	paper for
	B5, ISO B5,		40 lb)	the manual
	Executive,			feeder
	A5, A6
Card stock	Letter, Legal,	Refer to the Plain	60 to 165	1 sheet of
	Folio, A4, JIS	paper section	g/m2 (16 to	paper for
	B5, ISO B5,		43 lb)	the manual
	Executive,			feeder
	A5, A6
Minimum size (custom)		76 x 127 mm	60 to 165	1 sheet of
		(3.0 x 5.0 inches)	g/m2 (16 to	paper for
			43 lb bond)	the manual
Maximum size (custom)		215.9 x 356 mm		feeder
		(8.5 x 14 inches)

aIf paper weight is over 90 g/m2, load one sheet of paper in the manual feeder.

bMaximum capacity may differ depending on media weight, thickness, and environmental conditions.

Paper size supported in each mode

Mode	Size	Source
Copy mode	Letter, A4, Legal, Folio,	• paper input tray
	Executive, ISO B5, JIS	• manual feeder
	B5, A5, A6
Single side printing	All sizes supported by the	• paper input tray
	machine	• manual feeder

Guidelines for selecting and storing print materials

When selecting or loading paper, envelopes, or other print materials, keep these guidelines in mind:

•Always use paper and other materials that conform with the specifications listed on page 3.2.

•Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality.

•For the best print quality, use only high quality copier grade paper specifically recommended for use in laser printers.

•Avoid using the following paper types:

-Paper with embossed lettering, perforations, or a texture that is too smooth or too rough

-Erasable bond paper

-Multi-paged paper

-Synthetic paper and thermally reactive paper

-Carbonless paper and Tracing paper.

•Use of these types of paper could result in paper jams, chemical smells, and damage to your machine.

•Store paper in its ream wrapper until you are ready to use it. Place cartons on pallets or shelves, not on the floor. Do not place heavy objects on top of the paper, whether it is packaged or unpackaged. Keep it away from moisture or other conditions that can cause it to wrinkle or curl.

•Store unused materials at temperatures between 15o C and 30o C (59o F to 86o F). The relative humidity should be between 10% and 70%.

•Store unused paper in a moisture-proof wrap, such as a plastic container or bag, to prevent dust and moisture from contaminating your paper.

•Load special paper types one sheet at a time through the manual feeder to avoid paper jams.

•To prevent materials such as transparencies and label sheets from sticking together, remove them as they print out.

3.3

Loading original documents and paper