Samsung SCX-4300 Changing the default settings, Using special copy features, Auto Fit copying

3Press OK to save the selection.

Auto Fit copying

This feature automatically reduces or enlarges the original image to fit on the paper currently loaded in the machine.

A

Changing the default settings
	NOTE: When the size of the document you want to copy is not
The copy options, including darkness, original type, copy size	same as the size of the paper loaded, this function
	automatically adjusts the size of the document to fit the paper.
and number of copies, can be set to the most frequently used
	You can not adjust the copy size manually.
modes. When you copy a document, the default settings are
used unless they are changed by using the menus on the

control panel.					1 Load the document to be copied on the document glass,
To create your own default settings:						and close the cover.
					2 Press Menu until Special Copy appears on the top line of
1 Press Menu until Copy Setup appears on the top line of
						the display.
	the display.
						Press the scroll button (	or	) until Auto Fit appears and
2 Press OK when Default-Changeappears.				3
						press OK.
3 Press the scroll button (		or	) to select a setup option
					4 Customize the copy settings including copy size, darkness,
	and press OK.
						and original type, by using the control panel buttons. See
4 Press the scroll button (		or	) to change the setting or			page 4.1.
	enter the value and press OK.
5 Repeat steps 3 through 4, as needed.					NOTE: You cannot adjust the copy size using the Reduce/
					Enlarge menu while Auto Fit copying is enabled.
6 Press Stop/Clear to return to Standby mode.
					5 Press Start to begin copying.
NOTE: While you are setting copy options, pressing Stop/					ID Card copying
Clear cancels the changed settings and restores their default
status.					You can copy both sides of the ID Card like a drivers licence to
					a single side of paper.
					When you copy using this feature, the machine prints one side
Using special copy features					of the card on the upper half of the paper and the other side on
					the lower half without reducing the size of the original.
					If the loaded card is larger than the printable area, some
Clone copying					portions may not be printed.
					1 Place the ID Card to be copied on the document glass and
This feature prints multiple image copies from the original
						close the cover.
document on a single page. The number of images is
automatically determined by the original image and paper size.					2 Press Menu until Special Copy appears on the top line of
1 Place the document to be copied on the document glass,						the display.
	and close the cover.			3		Press the scroll button (	or	) until ID Card copy
2 Press Menu until Special Copy appears on the top line of						appears and press OK.
	the display.				4 Customize the copy settings including copy size, darkness,
3 Press the scroll button (		or	) until Clone appears and			and original type, by using the control panel buttons. See
	press OK.					page 4.1.
					5 Press Start to begin copying.
4 Customize the copy settings including copy size, darkness,
	and original type, by using the control panel buttons. See					Your machine begins scanning the front side and will then
	page 4.1.
						display Set Backside.
					6 Open the document cover and flip the document over.
NOTE: You cannot adjust the copy size using the Reduce/
						Close the cover.
Enlarge menu while making a clone copy.

5Press Start to begin copying.

4.2

Copying