Samsung SCX-4321, SCX-4521FR manual Supported Sizes of Paper, Guidelines for Using Paper

Supported Sizes of Paper

Paper	Dimensions*	Weight	Capacity**
Letter	8.5 x 11 in.
	(216 x 279 mm)
A4	8.3 x 11.7 in.
	(210 x 297 mm)
Executive	7.3 x 10.5 in.	• 16 to 24 lb	• 150
	(184 x 267 mm)
		(60 to 90 g/m2	sheets of
			20 lb
	8.5 x 14 in.
Legal		bond) for the tray
			(75 g/m2
	(216 x 356 mm)	with multi-pages
		feeding	bond)
	5.8 x 8.2 in.
			paper for
A5		• 16 to 43 lb
	(148 x 210 mm)		the tray
		(60 to 165 g/m2
			• 1 sheet of
	4.1 x 5.8 in.	bond) for the tray
A6			paper for
	(105 x 148 mm)	with single page
			the tray or
		feeding and the
			manual
	6.9 x 9.8 in.
ISO B5		manual tray
			tray
	(176 x 250 mm)
JIS B5	7.2 x 10.1 in.
	(182 x 257 mm)
Folio	8.5 x 13 in.
	(216 x 330 mm)
Minimum size	3 x 5 in	16 to 43 lb (60 to 165
(custom)	(76 x 127 mm)	g/m2 bond) for the
		tray with single page
Maximum size	8.5 x 14 in
		feeding and the
(custom)	(216 x 356 mm)	manual tray	1 sheet of
Transparency		138 to 146 g/m2	paper for
			the tray or
Labels	Same minimum	120 to 150 g/m2
			manual tray
	and maximum
Cards		90 to 163 g/m2
	paper sizes as
	listed above.
Envelopes		75 to 90 g/m2
		(20 to 24 lb)

*. The machine supports a wide range of media sizes. See “Paper Type, Input Sources, and Capacities” on page 3.1

**.Capacity may differ depending on media weight, thickness, and environmental conditions.

NOTE: You may experience jams when using print materials with a length of less than 5 in. (127 mm). For optimum performance, ensure that you are storing and handling the paper correctly. Please refer to “Paper Storage Environment” on page 10.5.

Guidelines for Using Paper

For the best result, use conventional 20 lb (75 g/m2 bond) paper. Ensure that the paper is of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles, voids, and curled or bent edges.

If you are unsure of what type of paper you are loading, such as bond or recycled paper, check the label on the package.

The following problems may cause print quality deviations, jamming or even damage to the machine:

Symptom	Problem with Paper	Solution
Poor print quality or	Too moist, too rough,	Try another kind of
	too smooth or	paper, between 100 ~
toner adhesion,
	embossed; faulty paper	400 Sheffield, 4 ~ 5 %
problems with feeding
	lot	moisture content.
Dropout, jamming,		Store paper flat in its
	Stored improperly	moisture-proof
curl
		wrapping.
Increased gray
background shading/	Too heavy	Use lighter paper.
printer wear
Excessive curl	Too moist, wrong grain
	direction or short-grain	Use long-grain paper.
problems with feeding
	construction
Jamming, damage to	Cutouts or perforations	Do not use paper with
machine		cutouts or perforations.
Problems with feeding	Ragged edges	Use good quality paper.

NOTES:

•Do not use letterhead paper printed with low-temperature inks, such as those used in some types of thermography.

•Do not use raised or embossed letterhead.

•The machine uses heat and pressure to fuse toner to the paper. Insure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).

10.4 Specifications