Samsung Msys 6750 Receiving automatically in ANS/FAX mode, Receiving manually in TEL mode

Receiving automatically in ANS/FAX mode

To use this mode, you must attach an answering machine to the TEL jack on the back of your machine.

1.Press and hold Rcv.Mode for about 2 seconds until the display changes. please repeat it until the display shows ‘ANS/FAX’ in the display window.

2.Any incoming voice calls will be answered by the answering machine. The caller can then leave a message on the answering machine.

3.If a fax tone is detected on the line, the fax receive mode is automatically activated.

Notes:

•If you have set your machine to ANS/FAX mode and your answering machine is switched off, or no answering machine is connected to the machine, the machine will automatically go into fax receive mode after several rings.

•If your answering machine has a ‘user-selectable ring counter’, set the machine to answer incoming calls within 4 ring.

•If you are in TEL mode (manual reception) when the answering machine is connected to your machine, you must switch off the answering machine, or the outgoing message from the answering machine will interrupt your phone conversation.

Receiving manually in TEL mode

To use this mode, you must attach a regular phone to the TEL jack on the back of the machine, you can answer voice phone calls and receive faxes manually.

1.Press and hold Rcv.Mode for about 2 seconds until the display changes. please repeat it until the display shows ‘TEL’ in the display window.

2.Answer an incoming call by picking up the receiver.

3.If you hear a fax tone, or if the person calling asks you to receive a fax, press Start/Enter on the machine or a regular phone, press the characters 9 (star-nine-star) on the regular telephone to initiate reception.

Note : The characters 9 (star-nine-star)are preset at the factory as the default remote receive start code for machine with a regular phone. The asterisks in the code are fixed characters, but you can be changed. For more information, see on page 2.42.

4.Replace the handset. The machine begins receiving and returns to standby mode when reception is complete.

2 Operation

Receiving a fax 2.19