RCA 1616262A Connections & Setup, Connect your DVD Player to your TV, Connect your TV to your VCR

Connections & Setup

VCR				TV (back panel)
VIDEO	AUDIO	OUT TO TV	CH3		R	L	AUDIO OUTPUT
	OUT			2
	R	L	CH4
							VIDEO
	IN	IN FROM ANT
	R	L					1
					Pr	Pb	Y
		3			TV ANT
					R	L/MONO
			From Cable		AUDIO		VIDEO S-VIDEO IN
			or Antenna

1A 1D 1B

DVD

1C

OUT

R L VIDEO Pr Pb Y

S-VIDEO

TV + DVD + VCR

1.Connect your DVD Player to your TV.

A.Connect the audio (white and red) cables to the R and L/MONO AUDIO jacks on the back of the TV and to the Audio Output jacks on the DVD player.

B.If your DVD player has Component Output Jacks (Y, Pb, Pr), connect three video grade cables to the Y, Pb, Pr jacks on the DVD player and to the Y, Pb, Pr jacks on the back of the TV. If your DVD player doesnÕt have Y, Pb, Pr jacks, go to C.

-OR-

C.If your DVD player has an S-Video jack, connect an S-Video cable to the S-Video jack on the DVD player and to the S-VIDEO IN jack on the back of the TV. If your DVD player doesnÕt have an S-Video jack, go to D.

-OR-

D.Connect a video cable (yellow) to the Video Output Jack on the DVD player and to the VIDEO jack on the back of the TV.

2.Connect your TV to your VCR

Connect a coaxial cable to the TV ANT jack on your TV and to the Output Jack on your VCR (sometimes labeled OUT TO TV).

Note: If your VCR has A/V output jacks, you can connect your TV to your VCR using audio/video cables for better quality.

3.Make sure cable or antenna is connected to your VCR.

Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.

Go to page 7

4 Graphics contained within this publication are for representation only. Chapter 1