Mitsubishi Electronics DX-TL950E operation manual Major operations and their functions

Major operations and their functions

■Front View

1 2 3

1	2	3	4	5	6	7	8	9
ACCESS
POWER
SPLIT/	ZOOM / 0
SEQUENCE			OUTPUT B	COM	PRE ALARM	M-DET	EMERGENCY	LOCK
		OUTPUT
		A/B
				Digital	Multplex
DIGITAL RECORDER DX-TL950					& Record

4	5	6	7
	REC/STOP	CLEAR/	ENTER/
		REW	FF

TIMER

8 9 10 11 12 13 14 15 16

1. POWER button

When pressing this button while the MAIN switch on the rear of this unit is set to ON, the power turns on and the button lights. When the button is pressed again, the unit will be in stand-by and the light will turn off. When the unit is in operational transition such as booting, the button will flash and other op- erations are not accepted.

2. ACCESS indicator

Illuminates during access to hard disk drive or Com- pact Flash Card.

3. Camera number buttons (1 to 9)

Press the button to display the image from the cam- era connected to this input on to the monitor.

4. TIMER button

When pressing this button, the unit is set to timer recording/stand-by and the TIMER button lights. When pressing this button for more than 1 second, timer recording/stand-by is cancelled and the TIMER button turns off.

5. REC/STOP button

When pressing this button, recording starts and the button lights. When pressing the button for more than 1 second, the recording stops and the light turns off. When pressing this button for more than 1 second during alarm recording, recording stops. During timer recording, recording will not stop even if the button is pressed.

8. SPLIT/SEQUENCE button

Press the button to display SPLIT9, SPLIT4 screen or SEQUENCE screen setting on multiplexer functions.

9. ZOOM button

When pressing this button once during single screen display, the screen is magnified by 100%. In the same way, pressing the button twice magnifies the screen by 200% and pressing the button three times magni- fies the screen by 400%. The magnification center point

(X)is displayed in the center of the screen in screen display 1. Press the camera number buttons (1, 2, 3, 4) to move the magnification location. When the ZOOM button is kept pressed for one second or longer, the operation of the camera number buttons and the SPLIT/ SEQUENCE button is switched between operation for OUTPUT A (screen of the monitor connected to the OUTPUT A connector and the VIDEO OUT connec- tor) and operation for OUTPUT B (screen of the monitor connected to the OUTPUT B connector).

To display image of the monitor connected to OUT- PUT B, set to “ON” in the setting of the “OUTPUT B ON/OFF” of the <MPX DISPLAY SETTINGS> screen.

see page 37.

10. OUTPUT B indicator

This is not lit when the operation of the camera number buttons and the SPLIT/SEQUENCE button is set to OUTPUT A, and it lights with switching to

OUTPUT B.

6. SHUTTLE ring

Used to set various menus and search functions, adjusting the playback speed, and rewinding or for- warding the recording images.

7. JOG dial

Used to set various menus and search functions, forwarding or rewinding the image during playback (field-by-field).

11.COM (COMMUNICATION) indicator

Illuminates when establishing the communication with personal computer.

12.PRE ALARM indicator

Illuminates during pre-alarm recording mode.

13. M-DET indicator

Illuminates when the motion detection function is on.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

10