Mitsubishi Electronics DX-TL950E operation manual Various playback functions

Page 65

Various playback functions

Various playback functions that can be operated using the JOG dial and SHUTTLE ring keys are featured on this unit.

If this unit is prompted to receive a live image while playing back, this unit will end playback.

While this unit is being prompted to receive a live image while transmitting, this unit cannot play back.

■Playing still frames

1.Press the PAUSE button during playback.

•The unit switches to still frame playback. Press the button again to resume playback.

•If a camera number (1 ~ 9) button is pressed during single screen still frame playback, the video of the camera number button pressed will be displayed by searching forward.

Image playback displays only one picture. Press the camera button to perform search. When a camera number without a recorded image or few recorded images is specified, search may continue for hours. If it is unnecessary, press the SEARCH button to release search status.

■Shuttle viewing/direct shuttle viewing

Turning the SHUTTLE ring during still frame playback, play- back or reverse playback, the playback speed can be changed.

1. (During shuttle viewing • • • )

Turn the SHUTTLE ring during still frame playback.

•The playback speed depends on the angle the SHUTTLE ring is turned.

•When letting go of the SHUTTLE ring, the ring will return to the center and the unit will return to still frame playback.

4 5 6

37

28

19

1High-speed rewind (1GB units)

2Reverse speed search (100MB units)

3Reverse speed search (10MB units)

4Reverse speed search (1MB units)

5Still frame playback

6Forward speed search (1MB units)

7Forward speed search (10MB units)

8Forward speed search (100MB units)

9High-speed fast forward (1GB units)

2.(During direct shuttle viewing • • • )

Turn the SHUTTLE ring during playback or reverse playback.

•The playback speed depends on the angle the SHUTTLE ring is turned.

•When letting go of the SHUTTLE ring, the ring will return to the center and the unit will return to still frame playback. (The unit will not return to playback or reverse playback.)

■Shuttle hold

The playback speed can be maintained even when letting go of the SHUTTLE ring during shuttle viewing.

1.Press the PAUSE (SHUTTLE HOLD) button while holding the SHUTTLE ring in angle during shuttle playback.

2.Let go of the SHUTTLE ring.

•The playback speed is maintained.

•To cancel shuttle hold, press the PAUSE button. The unit will switch to still frame playback.

■Frame-by-frame playback

1.Turn the JOG dial during still frame playback.

•Clockwise : Forward frame feeding.

•Counterclockwise : Reverse frame feeding.

•Clockwise and hold : Continuous forward frame feeding.

•Counterclockwise and hold : Continuous reverse frame feeding.

•When turning of JOG dial is stopped : Unit returns to still frame playback.

During frame feeding in the single screen mode, the frame feeding operation may not operate cor- rectly when the JOG dial is turned too fast since frame feeding is performed while searching the video of the display camera number.

■Reverse playback

1.Press the REV. PLAY (REVERSE PLAYBACK) button while playback is stopped.

•Playback will be made in the reverse direction. Playback will stop when press the STOP button.

When reverse playback is performed first after turning the power on, the last recorded video will be played back in reverse first.

■High-speed fast-forward/high-speed rewind

1.Turn the SHUTTLE ring for more than 1 second while playback is stopped.

• Clockwise for more than 1 second :

Will activate High-speed fast-forward playback (1GB units).

• Counterclockwise for more than 1 second :

Will activate High-speed rewind playback (1GB units).

• Press the STOP button: Playback is stopped.

During high-speed fast-forward/rewind, the current position is displayed on the bottom or top of the screen. S (start) and E (end) indicate the beginning and end of the HDD space and “I” indicates the current position.

current position

S E

■Changing playback intervals

Although, playback and reverse playback use the same interval as that for recording, it is possible to change the playback interval. This function is useful for slow-motion playback of fast-moving footage, or quick playback of ex- tensive footage without skipping frames.

1-1. (To play back recording with fast motion slowly • • • ) Press the REV. PLAY (REVERSE PLAYBACK) button during playback or reverse playback.

•Playback or reverse playback will be made at 0.125P intervals per camera.

ENGLISH

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents DX-TL950E Built-in duplex 9 channel multiplexer FeaturesRecording NetworkAuto set-up Ease of useWhen not in use always turn OFF the Main switch Protect the Power CordMains Lead Connection Contents 65,66 60-6367-71 72,73Auto SET UP FlowchartFlowchart for connection and settings Setting the motion detection Setting other various functionsSetting the timer recording Timer recording is executed/completedMajor operations and their functions Lock indicator Emergency indicatorAnalogue OUT connectors Front View Inside of the doorSET UP button Alarm Interrupt buttonMajor operations and their functions Search buttonVideo OUT connectors Main switchCamera in connectors Camera OUT connectorsEthernet connector RS-232C connectorConnections Connecting to Cctv camera, monitor, sensorConnections Alarm Recording ConnectionConnecting with analog video recorder Turn the Shuttle ring clockwise Auto SET UPHDD Setting Auto SET UP / Initial settingsWhen the setting is complete, press the Power button InitializationMultiplexer functions Menu settingsBasic Operations Default SUN, LAST, MAR Daylight SAVING/DAYLIGHT SettingTime Date Adjust Basic OperationsRecorded capacity display function Basic manual recordingPresent time display Long SUPER, HIGH, STDSTANDARD, BASIC, LongShort Back repeatedly see HDD Repeat PLAY, Basic playbackTo change HDD or Compact Flash Card playback device Press the Play buttonTime Date Search Basic searchTo pause playback, press the Pause button To stop playback, press the Stop buttonLanguage Selection For playback, see Various playback func- tions, pages 65,66English , Francais , Deutsch Españ OL, PyCCKNN, ItalianoMenu functions Menu SettingMain Menu SUB MenuSET UP Menu functions Initial SET UP/INFORMATION HDD SettingsMain Menu SUB Menu REC/STOP + Power button Search Selection Menu Copy MenuDisplay Mode Time Date AdjustCamera TITLE/MEMO Setting Clock Location SettingDisplay returns to the Camera TITLE/MEMO Setting screen Camera TITLE/MEMO Setting screen appearsRepeat steps 2 ~ 6 to input Counter in the camera number Appears in reversed color on the very left of the stringSetting default Bottom Duplex Mode DisplayCamera number button operations Plexer can also be found on seeSPLIT/SEQUENCE button operations Available modesZoom MPX Display SettingsSPLIT4 Screen Setting MPX Display SettingsSPLIT9 Screen Setting For the SPLIT9 Screen SETTING, SPLIT9 screen can be set3 , 4 , 5 , 6 , 7 Sequence SettingInterlace Setting default 3 , 4 , 5 , 6 , 7 , 8 Detection Mask SettingSelection Camera Number Nected camera, are setTest Mode Motion Detection SettingsSensitivity Motion ThresholdIng pre-alarm recording, see Settings concerning normal recording and alarm recordingWhen setting the camera selection during alarm recording Alarm SettingPicture quality for normal recording pages 22,23 Record SettingsAbout alarm recording PRE Alarm REC Alarm REC DurationRecording time during alarm recording can be set Pre-alarm recording can be setStructure of the Timer Program screen Timer Program SettingsTimer Program Press the Timer button Holiday Setting Timer Program SettingsCerning recording mode settings, see pages 22,23 Overlapping Timer settingsSetting default OFF HDD Settings HDD Repeat REC MAIN/HDD Repeat REC SUBHDD Repeat Play IM-CHECK PlaySequential Play Initial SET UP/INFORMATIONAudio Recording Single screen sequential playback startsBuzzer Rear Terminal Settings Mode OUT 1 ~ Mode OUTKEY Sound Setting of Remain HDD default 10% Setting of Device default MainCall OUT Settings Remain HDDRS-232C Communication Port SettingsHDD Main FULL/HDD SUB Full Emergency REC DurationMail Address SettingsEthernet Alarm Notification Setting Service Port SettingINFORMATION/SERVICE 1/2 INFORMATION/SERVICEINFORMATION/SERVICE 2/2 Setting is confirmed and stops flashingData Clear Reset to Factory Settings Menu screen settings are resetMenu screen settings are reset Simple Lock PasswordPassword Lock Input the Password entered in First in Second To unlock the PasswordTo unlock the Password for level Press the SET UP button Repeat steps 2-2 ~ 2-4 to set level 2 and levelTo lock the Password only level1 to level Changing from Password Lock mode to Simple Lock modeTo change the Password Press the Warning Reset buttonTo update menu settings of this unit Quick SettingsTo save menu settings of this unit to a Compact Flash Card Quick Settings screen appearsOperation examples SettingOperation example OperationHDD Settings screen setting see pages 47,48 This example uses the holiday settingHoliday Setting 31/12, 01/01, 02/01, 03/01 Camera number 1 ~ Input titleAlarm Setting C screen setting see REC Mode C screen setting seeRecord Setting C screen setting see Operation examplesRecord Setting D screen setting see REC Mode D screen setting seeRecord Setting C Alarm Setting DPre-alarm recording PRE Alarm RecordingsVarious recordings Emergency RecordingsVarious playback functions Press the REV. Play Reverse Playback button Simultaneous playback during recordingTime Date Search Various searchSearch Selection Various search Index SEARCH/ALARM Index SearchPress the Search button Playback the search resultTo clear the search screen, press the Search button twice Alarm Skip SearchAlarm Skip Search In the case of forward direction To clear the alarm list, erase the data Alarm List SearchSearch screen selected in previous Search Type appears START/END SearchPress either the Play REV. Play or Pause button An end. Be careful Making Copy/RestoreMenu changes to Restore when CFC Main HDD is selected Back see Sequential PLAY, Copying from unit to videotapeVideo Cord Audio Cord Analogue Video Cassette RecorderPower failure reset recording Power failure compensation circuitHDD Setting Other convenient functionsPoints to be aware of regarding Partition mode Points to be aware of regarding Mirror modePartition Size setting appears on the Initialization screen PARTITION/PARTITION SizeAlarm Display Covert Camera SettingCovert Camera Setting screen appears Other convenient functionsCommunications by Web Browser AuthenticationCommunications by Web Browser Personal computer product requirementsLive monitor Communications by Web BrowserWelcome Playback StopUser maintenance Alarm SearchTime Search Select the date and time and click SearchChange log in user Covert Camera SettingLog out Logged in user is changed and the Welcome screen appears Continuous recording time table Recording time tableHDD continuous recording time for 250GB drive Without Audio recordingCompact Flash Card continuous recording time for 64MB Recording time tableDescription of problem Please consult the following TroubleshootingDetection Mask Setting ? TroubleshootingMain Image Modified Glossary GlossaryConnectors SpecificationsGND Call OUT/CALL OUT GND
Related manuals
Manual 90 pages 544 b
Top Page Image Contents