Mitsubishi Electronics DX-TL950E Alarm REC Duration, PRE Alarm REC, Motion DET REC

Page 43

ALARM REC DURATION

The recording time during alarm recording can be set.

<RECORD

SETTINGS>

 

 

ALARM SETTING

 

 

RECORD

SETTING

 

5S

>>ALARM REC DURATION

PRE ALARM REC

( S )

S

MOTION

DET REC

 

ALARM

Setting ( default : “5S” )

“2S”, “5S”, “10S”, “15S”, “30S”, “45S”, “1M”, “2M”, “5M”, “10M”, “20M”, “30M”, “60M”, “MANUAL”

“MANUAL” : Alarm recording is continued until the grounding of the ALARM IN terminals is cancelled.

1.Press the SET UP button } <SETTINGS> } Select “ALARM REC DURATION” in the <RECORD SETTINGS> screen. Display the desired setting and confirm.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

PRE ALARM REC

The pre-alarm recording can be set.

<RECORD SETTINGS>

 

 

ALARM SETTING

 

 

RECORD SETTING

 

5S

ALARM REC DURATION

>>PRE ALARM REC

( S )

S

MOTION DET REC

 

ALARM

<RECORD SETTINGS>

 

 

ALARM SETTING

 

 

RECORD SETTING

 

5S

ALARM REC DURATION

PRE ALARM REC

( S )

S

>>MOTION DET REC

 

ALARM

Setting ( default : “ALARM” )

“ALARM” : Alarm recording is started when the mo- tion is detected.

“NORMAL” : Normal recording is started when the motion is detected.

When “NORMAL” is selected by “MOTION DET REC” setting during alarm partition employment, data is recorded on HDD(MAIN). When playing back recorded data, please select “MAIN” in the “PLAYBACK DEVICE” setting.

1.Press the SET UP button } <SETTINGS> } Select “MOTION DET REC” in the <RECORD SETTINGS> screen, and display the desired setting.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

ENGLISH

Setting ( default : “0S” )

“0S”, “1S”, “2S”, • • • • • ,“58S”, “59S”, “60S”, “90S”, “120S”, “150S”, “180S”

When “0S” is selected, the pre-alarm recording is inoperable.

The maximum pre-alarm recordable time is dis- played in “( )”. Beware that when set the pre-alarm recording time longer than the maximum the set- tings will turn red. Set the time within the recording time limit, so that the display returns to white. Even if the time is set beyond the limit, Pre-Alarm record- ing time is not changed.

1.Press the SET UP button } <SETTINGS> } Select “PRE ALARM REC” in the <RECORD SETTINGS> screen, and display the desired setting.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

MOTION DET REC

Select whether alarm recording or normal recording is to be started when motion is detected.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

43

Image 43
Contents DX-TL950E Network FeaturesBuilt-in duplex 9 channel multiplexer RecordingAuto set-up Ease of useWhen not in use always turn OFF the Main switch Protect the Power CordMains Lead Connection Contents 72,73 60-6365,66 67-71Flowchart for connection and settings FlowchartAuto SET UP Timer recording is executed/completed Setting other various functionsSetting the motion detection Setting the timer recordingMajor operations and their functions Front View Inside of the door Emergency indicatorLock indicator Analogue OUT connectorsSearch button Alarm Interrupt buttonSET UP button Major operations and their functionsCamera OUT connectors Main switchVideo OUT connectors Camera in connectorsEthernet connector RS-232C connectorConnections Connecting to Cctv camera, monitor, sensorConnecting with analog video recorder Alarm Recording ConnectionConnections Turn the Shuttle ring clockwise Auto SET UPInitialization Auto SET UP / Initial settingsHDD Setting When the setting is complete, press the Power buttonBasic Operations Menu settingsMultiplexer functions Basic Operations Daylight SAVING/DAYLIGHT SettingDefault SUN, LAST, MAR Time Date AdjustPresent time display Basic manual recordingRecorded capacity display function Short SUPER, HIGH, STDSTANDARD, BASIC, LongLong Press the Play button Basic playbackBack repeatedly see HDD Repeat PLAY, To change HDD or Compact Flash Card playback deviceTo stop playback, press the Stop button Basic searchTime Date Search To pause playback, press the Pause buttonEspañ OL, PyCCKNN, Italiano For playback, see Various playback func- tions, pages 65,66Language Selection English , Francais , DeutschSUB Menu Menu SettingMenu functions Main MenuSET UP Menu functions Initial SET UP/INFORMATION HDD SettingsMain Menu SUB Menu REC/STOP + Power button Search Selection Menu Copy MenuClock Location Setting Time Date AdjustDisplay Mode Camera TITLE/MEMO SettingAppears in reversed color on the very left of the string Camera TITLE/MEMO Setting screen appearsDisplay returns to the Camera TITLE/MEMO Setting screen Repeat steps 2 ~ 6 to input Counter in the camera numberSetting default Bottom Duplex Mode DisplayAvailable modes Plexer can also be found on seeCamera number button operations SPLIT/SEQUENCE button operationsZoom MPX Display SettingsFor the SPLIT9 Screen SETTING, SPLIT9 screen can be set MPX Display SettingsSPLIT4 Screen Setting SPLIT9 Screen SettingInterlace Sequence Setting3 , 4 , 5 , 6 , 7 Nected camera, are set Detection Mask SettingSetting default 3 , 4 , 5 , 6 , 7 , 8 Selection Camera NumberMotion Threshold Motion Detection SettingsTest Mode SensitivityAlarm Setting Settings concerning normal recording and alarm recordingIng pre-alarm recording, see When setting the camera selection during alarm recordingAbout alarm recording Record SettingsPicture quality for normal recording pages 22,23 Pre-alarm recording can be set Alarm REC DurationPRE Alarm REC Recording time during alarm recording can be setTimer Program Timer Program SettingsStructure of the Timer Program screen Press the Timer button Overlapping Timer settings Timer Program SettingsHoliday Setting Cerning recording mode settings, see pages 22,23IM-CHECK Play HDD Settings HDD Repeat REC MAIN/HDD Repeat REC SUBSetting default OFF HDD Repeat PlaySingle screen sequential playback starts Initial SET UP/INFORMATIONSequential Play Audio RecordingKEY Sound Rear Terminal Settings Mode OUT 1 ~ Mode OUTBuzzer Remain HDD Setting of Device default MainSetting of Remain HDD default 10% Call OUT SettingsEmergency REC Duration Communication Port SettingsRS-232C HDD Main FULL/HDD SUB FullEthernet SettingsMail Address Alarm Notification Setting Service Port SettingSetting is confirmed and stops flashing INFORMATION/SERVICEINFORMATION/SERVICE 1/2 INFORMATION/SERVICE 2/2Menu screen settings are reset Reset to Factory Settings Menu screen settings are resetData Clear Password Lock PasswordSimple Lock Repeat steps 2-2 ~ 2-4 to set level 2 and level To unlock the PasswordInput the Password entered in First in Second To unlock the Password for level Press the SET UP buttonPress the Warning Reset button Changing from Password Lock mode to Simple Lock modeTo lock the Password only level1 to level To change the PasswordQuick Settings screen appears Quick SettingsTo update menu settings of this unit To save menu settings of this unit to a Compact Flash CardOperation SettingOperation examples Operation exampleCamera number 1 ~ Input title This example uses the holiday settingHDD Settings screen setting see pages 47,48 Holiday Setting 31/12, 01/01, 02/01, 03/01Operation examples REC Mode C screen setting seeAlarm Setting C screen setting see Record Setting C screen setting seeAlarm Setting D REC Mode D screen setting seeRecord Setting D screen setting see Record Setting CEmergency Recordings PRE Alarm RecordingsPre-alarm recording Various recordingsVarious playback functions Press the REV. Play Reverse Playback button Simultaneous playback during recordingSearch Selection Various searchTime Date Search Playback the search result Index SEARCH/ALARM Index SearchVarious search Press the Search buttonAlarm Skip Search In the case of forward direction Alarm Skip SearchTo clear the search screen, press the Search button twice To clear the alarm list, erase the data Alarm List SearchPress either the Play REV. Play or Pause button START/END SearchSearch screen selected in previous Search Type appears Menu changes to Restore when CFC Main HDD is selected Making Copy/RestoreAn end. Be careful Analogue Video Cassette Recorder Copying from unit to videotapeBack see Sequential PLAY, Video Cord Audio CordOther convenient functions Power failure compensation circuitPower failure reset recording HDD SettingPARTITION/PARTITION Size Points to be aware of regarding Mirror modePoints to be aware of regarding Partition mode Partition Size setting appears on the Initialization screenOther convenient functions Covert Camera SettingAlarm Display Covert Camera Setting screen appearsPersonal computer product requirements AuthenticationCommunications by Web Browser Communications by Web BrowserWelcome Communications by Web BrowserLive monitor Playback StopSelect the date and time and click Search Alarm SearchUser maintenance Time SearchLog out Covert Camera SettingChange log in user Logged in user is changed and the Welcome screen appears Without Audio recording Recording time tableContinuous recording time table HDD continuous recording time for 250GB driveCompact Flash Card continuous recording time for 64MB Recording time tableDescription of problem Please consult the following TroubleshootingDetection Mask Setting ? TroubleshootingMain Image Modified Glossary GlossaryCall OUT/CALL OUT GND SpecificationsConnectors GND
Related manuals
Manual 90 pages 544 b