Mitsubishi Electronics DX-TL950E Other convenient functions, Covert Camera Setting, Alarm Display

Other convenient functions (continued)

■COVERT CAMERA SETTING

The video of the specified camera number can be set to not be displayed regardless of the presence of video signals.

Setting ( default : “ON” )

“ON”, “OFF”

While COVERT CAMERA SETTING operation mode when the video is interrupted to playback such as camera trouble, warning indicator will not appear on the screen. If “WARNING” is set in BUZZER setting the BUZZER sounds and the unit registers this error in the WARNING LOG LIST, CALL OUT signal is emit- ted.

When setting “COVERT CAMERA SETTING” to “OFF” for a camera set for recording operation, record- ing will be performed without displaying the video on the screen.

When setting “COVERT CAMERA SETTING” to “OFF”, the playback video will not be displayed and the set camera number screen will turn black. Furthermore, the operation mode display and alarm display setting will not function.

1.Press the SET UP button and <SETTINGS> appears. With the <MPX DISPLAY SETTINGS> screen displayed, press the WARNING RESET button for more than 5 seconds.

•The <COVERT CAMERA SETTING> screen appears.

<COVERT CAMERA SETTING>

<COVERT CAMERA SETTING>

NUMBER	DISPLAY
>>1	ON

2ON

3ON

4ON

5ON

6ON

7ON

8ON

9ON

ALARM DISPLAY OFF

2.Turn the JOG dial to select the camera number to set and turn the SHUTTLE ring clockwise.

•The background of the setting turns red and flashes.

3.Turn the JOG dial to select “OFF” and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops.

•The set camera number screen will turn black.

4.When continuing with setting for other camera number, repeat steps 2 and 3.

5.When completed with all settings, turn the SHUTTLE ring counterclockwise or press the SET UP button.

•The channel display of the camera number screen set with “OFF” for “COVERT CAMERA SETTING” will become black.

1	2	3
	5	6
7		9

♦ALARM DISPLAY

Setting for displaying the single screen with alarm sig- nal inputted when there is alarm signal. If another alarm signal is inputted during alarm recording, the camera video with the latest alarm signal will appear on the sin- gle screen display. After alarm recording is completed, the screen returns to the previous display.

Setting ( default : “OFF” )

“OFF”, “ON”

1.Press the SET UP button and <SETTINGS> appears. With the <MPX DISPLAY SETTINGS> screen displayed, press the WARNING RESET button for more than 5 seconds.

•The <COVERT CAMERA SETTING> screen appears.

2.Select “ALARM DISPLAY” by turning the JOG dial, and turn the SHUTTLE ring clockwise.

•The background of the setting turns red and flashes.

3.Turn the JOG dial to select “ON” and turn the SHUTTLE ring clockwise.

•The setting is confirmed and flashing stops.

4.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

76