Mitsubishi Electronics DX-TL950E operation manual Alarm Skip Search

6. To stop playback or still-frame playback, press the STOP button.

To change the desired camera number to the single screen dis- play during still-frame playback in SPLIT9 display, press the SEARCH button to clear the search setting screen and press the desired cam- era number button.

Search may not perform properly at times depending on the re- corded condition of the index signals.

7. To clear the search screen, press the SEARCH button twice.

■ALARM SKIP SEARCH

This function searches up to where the Alarm recording signal is located, and can playback at 4 second intervals.

<ALARM SKIP SEARCH> In the case of forward direction

	Present position
SKIP COUNT		01			02
			Alarm			Alarm
			Recording			Recording
		Index signal			Index signal
	Search			Search		Search
			Approx. 4 sec.			Approx. 4 sec.
			play			play

1.Press the SEARCH button.

•The search screen selected in the “SEARCH TYPE” ( see page 67) appears.

2.(When the desired search screen is not displayed on the screen • • • ) Change the previous “SEARCH TYPE” setting and display the “ALARM SKIP SEARCH” screen.

3.Select “EXECUTE(FORWARD)” or “EXECUTE(REVERSE)” and confirm.

•“EXECUTE(FORWARD)” : Search is performed in the forward direction.

•“EXECUTE(REVERSE)” : Search is performed in the reverse direction.

•To cancel the search, press the SEARCH button twice.

•Playback of search result from skip search will be in SPLIT9 display regardless

of whether the “SELECTION CAMERA NUMBER” ( see page 67) is set to “ALL” or individual camera number is selected.

• To return to the normal screen, press the SEARCH button twice.

When execute “ALARM SKIP SEARCH” while the “PARTITION” is set, set to “SUB” in “PLAYBACK DEVICE”.

Search may take time, depending on the recording status of the index signal. Press the STOP button while searching to end search.

Press the desired camera number button when performing skip search in SPLIT9 display, the video of the camera number button is changed to single screen display.

4.Press the PAUSE button when the desired video is displayed and press the PLAY button.

5.To stop ALARM SKIP SEARCH, press the STOP button.

6.To clear the search screen, press the SEARCH button twice.

When performing skip search in the reverse direction with index signals of less than 4 seconds, that portion may play back repeat- edly. In this case, press the STOP button to stop the search and perform skip search in the reverse direction again after the particular portion has been passed using reverse playback, etc.

03

Alarm

Recording

Index signal

Search

Approx. 4 sec. play

<ALARM SKIP SEARCH>

>>EXECUTE(FORWARD)

EXECUTE(REVERSE)

PUSH SEARCH KEY FOR SEARCH SELECTION

ENGLISH

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

69