Mitsubishi Electronics DX-TL950E Selection Camera Number, Detection Mask Setting, ERA Number

Page 39

<MOTION DETECTION SETTINGS>

In this menu, the conditions of the motion detection func-

• Display “• ” for the left half of the screen to inactivate

tion for normal recording and alarm recording, which is

motion detection.

started when detecting motion within the video of the con-

1. In “SELECTION CAMERA NUMBER , select the camera

nected camera, are set.

 

for setting the detection area.

ENGLISH

SELECTION CAMERA NUMBER

The camera for motion detection setting is selected. Since settings can be made for each camera, more detailed set- tings are possible.

<MOTION DETECTION

SETTINGS>

 

>>SELECTION CAMERA

NUMBER

1

DETECTION MASK SETTING

 

SENSITIVITY

HIGH••<<<LOW

MOTION THRESHOLD

 

5

TEST MODE

 

 

2.Select “DETECTION MASK SETTING” and turn the SHUTTLE ring clockwise.

The dotted screen with detection areas is displayed and the background of the most upper left dot turns red and flashes.

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

&& & & & & & & & & & & & & & &

Setting ( default : “1 ” )

1 ”, “2 ”, “3 ”, “4 ”, “5 ”, “6 ”, “7 ”, “8 ”, “9

When selecting the <MOTION DETECTION SETTINGS> screen during single screen display of any specified camera number, that camera will be displayed as the initial value of “SELECTION CAM-

ERA NUMBER”.

1.Press the SET UP button } <SETTINGS> } Select “SELECTION CAMERA NUMBER” in the <MOTION DETECTION SETTINGS> screen. Display the desired setting and confirm.

Confirm the “SELECTION CAMERA NUMBER” setting to switch the background to the video of the selected camera number.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

The motion detection function will not operate when the <MOTION DETECTION SETTINGS>

screen is displayed.

DETECTION MASK SETTING

The area to activate motion detection is set here. Any of the 192 dotted detection areas displayed by splitting indi- vidually loaded video to equal 16 X 12 pixel sizes can be selected and set.

Definition of setting mark ( default : all areas “& ” (active) ) “& ” : Area activated with motion detection.

“• ” : Area inactivated with motion detection.

It is possible to set various areas per camera.

Example of screen setting

For the video loaded from the camera set in “SELECTION CAMERA NUMBER” :

Display “& ” for the right half of the screen to activate motion detection.

3. Use the , , and buttons to select the dot to activate/

inactivate and press the camera number button 8 .

• The “ & ” (active) setting changes to “ • ” (inactive) setting.

& & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

& & & & & & & & & & & & & & & &

When pressing the SPLIT/SEQUENCE button, all dots change to “& ” (active). When pressing the ZOOM button, all dots change to “• ” (inactive).

When pressing the camera number 8 button, dot change to “• ” (inactive). When pressing the

camera number 9 button, dot change to “& ” (active).

4.Repeat step 3 to activate/inactivate all desired dots.

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

• • • • • • • & & & & & & & &

5.Turn the SHUTTLE ring counterclockwise.

The setting is confirmed and the display returns to the <MOTION DETECTION SETTINGS> screen.

During set detection mask setting, other settings are not accepted. To exit the menu screen during setting, turn the SHUTTLE ring counterclockwise.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

Operations

39

Image 39
Contents DX-TL950E Network FeaturesBuilt-in duplex 9 channel multiplexer RecordingAuto set-up Ease of useWhen not in use always turn OFF the Main switch Protect the Power CordMains Lead Connection Contents 72,73 60-6365,66 67-71Flowchart Flowchart for connection and settingsAuto SET UP Timer recording is executed/completed Setting other various functionsSetting the motion detection Setting the timer recordingMajor operations and their functions Front View Inside of the door Emergency indicatorLock indicator Analogue OUT connectorsSearch button Alarm Interrupt buttonSET UP button Major operations and their functionsCamera OUT connectors Main switchVideo OUT connectors Camera in connectorsEthernet connector RS-232C connectorConnections Connecting to Cctv camera, monitor, sensorAlarm Recording Connection Connecting with analog video recorderConnections Turn the Shuttle ring clockwise Auto SET UPInitialization Auto SET UP / Initial settingsHDD Setting When the setting is complete, press the Power buttonMenu settings Basic OperationsMultiplexer functions Basic Operations Daylight SAVING/DAYLIGHT SettingDefault SUN, LAST, MAR Time Date AdjustBasic manual recording Present time displayRecorded capacity display function SUPER, HIGH, STDSTANDARD, BASIC, Long ShortLong Press the Play button Basic playbackBack repeatedly see HDD Repeat PLAY, To change HDD or Compact Flash Card playback deviceTo stop playback, press the Stop button Basic searchTime Date Search To pause playback, press the Pause buttonEspañ OL, PyCCKNN, Italiano For playback, see Various playback func- tions, pages 65,66Language Selection English , Francais , DeutschSUB Menu Menu SettingMenu functions Main MenuSET UP Menu functions Initial SET UP/INFORMATION HDD SettingsMain Menu SUB Menu REC/STOP + Power button Search Selection Menu Copy MenuClock Location Setting Time Date AdjustDisplay Mode Camera TITLE/MEMO SettingAppears in reversed color on the very left of the string Camera TITLE/MEMO Setting screen appearsDisplay returns to the Camera TITLE/MEMO Setting screen Repeat steps 2 ~ 6 to input Counter in the camera numberSetting default Bottom Duplex Mode DisplayAvailable modes Plexer can also be found on seeCamera number button operations SPLIT/SEQUENCE button operationsZoom MPX Display SettingsFor the SPLIT9 Screen SETTING, SPLIT9 screen can be set MPX Display SettingsSPLIT4 Screen Setting SPLIT9 Screen SettingSequence Setting Interlace3 , 4 , 5 , 6 , 7 Nected camera, are set Detection Mask SettingSetting default 3 , 4 , 5 , 6 , 7 , 8 Selection Camera NumberMotion Threshold Motion Detection SettingsTest Mode SensitivityAlarm Setting Settings concerning normal recording and alarm recordingIng pre-alarm recording, see When setting the camera selection during alarm recordingRecord Settings About alarm recordingPicture quality for normal recording pages 22,23 Pre-alarm recording can be set Alarm REC DurationPRE Alarm REC Recording time during alarm recording can be setTimer Program Settings Timer ProgramStructure of the Timer Program screen Press the Timer button Overlapping Timer settings Timer Program SettingsHoliday Setting Cerning recording mode settings, see pages 22,23IM-CHECK Play HDD Settings HDD Repeat REC MAIN/HDD Repeat REC SUBSetting default OFF HDD Repeat PlaySingle screen sequential playback starts Initial SET UP/INFORMATIONSequential Play Audio RecordingRear Terminal Settings Mode OUT 1 ~ Mode OUT KEY SoundBuzzer Remain HDD Setting of Device default MainSetting of Remain HDD default 10% Call OUT SettingsEmergency REC Duration Communication Port SettingsRS-232C HDD Main FULL/HDD SUB FullSettings EthernetMail Address Alarm Notification Setting Service Port SettingSetting is confirmed and stops flashing INFORMATION/SERVICEINFORMATION/SERVICE 1/2 INFORMATION/SERVICE 2/2Reset to Factory Settings Menu screen settings are reset Menu screen settings are resetData Clear Password Password LockSimple Lock Repeat steps 2-2 ~ 2-4 to set level 2 and level To unlock the PasswordInput the Password entered in First in Second To unlock the Password for level Press the SET UP buttonPress the Warning Reset button Changing from Password Lock mode to Simple Lock modeTo lock the Password only level1 to level To change the PasswordQuick Settings screen appears Quick SettingsTo update menu settings of this unit To save menu settings of this unit to a Compact Flash CardOperation SettingOperation examples Operation exampleCamera number 1 ~ Input title This example uses the holiday settingHDD Settings screen setting see pages 47,48 Holiday Setting 31/12, 01/01, 02/01, 03/01Operation examples REC Mode C screen setting seeAlarm Setting C screen setting see Record Setting C screen setting seeAlarm Setting D REC Mode D screen setting seeRecord Setting D screen setting see Record Setting CEmergency Recordings PRE Alarm RecordingsPre-alarm recording Various recordingsVarious playback functions Press the REV. Play Reverse Playback button Simultaneous playback during recordingVarious search Search SelectionTime Date Search Playback the search result Index SEARCH/ALARM Index SearchVarious search Press the Search buttonAlarm Skip Search Alarm Skip Search In the case of forward directionTo clear the search screen, press the Search button twice To clear the alarm list, erase the data Alarm List SearchSTART/END Search Press either the Play REV. Play or Pause buttonSearch screen selected in previous Search Type appears Making Copy/Restore Menu changes to Restore when CFC Main HDD is selectedAn end. Be careful Analogue Video Cassette Recorder Copying from unit to videotapeBack see Sequential PLAY, Video Cord Audio CordOther convenient functions Power failure compensation circuitPower failure reset recording HDD SettingPARTITION/PARTITION Size Points to be aware of regarding Mirror modePoints to be aware of regarding Partition mode Partition Size setting appears on the Initialization screenOther convenient functions Covert Camera SettingAlarm Display Covert Camera Setting screen appearsPersonal computer product requirements AuthenticationCommunications by Web Browser Communications by Web BrowserCommunications by Web Browser WelcomeLive monitor Playback StopSelect the date and time and click Search Alarm SearchUser maintenance Time SearchCovert Camera Setting Log outChange log in user Logged in user is changed and the Welcome screen appears Without Audio recording Recording time tableContinuous recording time table HDD continuous recording time for 250GB driveCompact Flash Card continuous recording time for 64MB Recording time tableDescription of problem Please consult the following TroubleshootingDetection Mask Setting ? TroubleshootingMain Image Modified Glossary GlossaryCall OUT/CALL OUT GND SpecificationsConnectors GND
Related manuals
Manual 90 pages 544 b