Mitsubishi Electronics DX-TL950E operation manual Information/Service, INFORMATION/SERVICE 1/2

<INITIAL SET UP/INFORMATION> (continued)

8.Turn the JOG dial to display the desired setting and turn the SHUTTLE ring clockwise.

•The setting is confirmed and stops flashing.

9.(Finalizing update menu settings of the transmission contents • • • )

Return to the <ETHERNET> screen by turnning the SHUTTLE ring counterclockwise and turn the SHUTTLE ring counterclockwise or press the SET UP button.

10.(Finalizing update menu settings of number of IP ADDRESS , TRAGET PORT or OWN PORT • • • )

Return to the <ETHERNET> screen by turnning the SHUTTLE ring counterclockwise and press the SET UP button.

•The power turns off automatically, then the unit will boot up.

Press the SET UP button to return to the normal screen without changing the setting.

■INFORMATION/SERVICE

The <INFORMATION/SERVICE> screen is used to check log and device lists after power failure, and ini- tialization the menu. The total operating time is displayed on the 2/2 screen.

<INFORMATION/SERVICE> 1/2

<INFORMATION/SERVICE> (1/2)

>>HDD INFORMATION

CFC INFORMATION

WARNING LOG LIST

RESET TO FACTORY SETTINGS

MAIN HDD DATA CLEAR

SUB HDD DATA CLEAR

CFC DATA CLEAR

<INFORMATION/SERVICE> 2/2

<INFORMATION/SERVICE> (2/2)

ELAPSED TIME: SYSTEM 3H

HDD SETTING	PARTITION
PARTITION SIZE	10%

The <INFORMATION/SERVICE> screen consists of 2 pages. The second page is appeared by turning the JOG dial clockwise when the cursor points out the setting of the bottom of the screen.

“SUB HDD DATA CLEAR” is appeared on page 1/2 of the <INFORMATION/SERVICE> screen when “PARTITION” is selected on “HDD SETTING” of the <INITIALIZATION> screen.

“PARTITION SIZE” is appeared on page 2/2 of the <INFORMATION/SERVICE> screen when “PARTITION” is selected on “HDD SETTING” of the <INITIALIZATION> screen.

♦HDD INFORMATION/CFC INFORMATION INFORMATION is used to check the amount of available space in the HDD and Compact Flash Cards inserted into the unit.

1-1. (To check HDD RECORD data • • • )

Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “HDD INFORMATION” in the <INFORMATION/SERVICE> (1/2) screen, and turn the SHUTTLE ring clockwise.

• The <HDD INFORMATION> screen is displayed.

<HDD INFORMATION>
INTERNAL HDD
MASTER:	HDD(250GB)
SLAVE :	NONE
MAIN START	---------- --:--	:--
END	---------- --:--	:--
SUB START	---------- --:--	:--
END	---------- --:--	:--

Recording start and end times of “SUB” area is ap- peared when the “HDD SETTING” is selected on “PARTITION” of the <INITIALIZATION> screen.

1-2.(To check RECORD data of the Compact Flash Card inserted into the unit or whether MENU INFORMATION is recorded • • • )

Press the SET UP button } <SETTINGS> } <INITIAL SET UP/INFORMATION> } Select “CFC INFORMATION” in the <INFORMATION/SERVICE> (1/2) screen, and turn the SHUTTLE ring clockwise.

•The <CFC INFORMATION> screen of the Compact Flash Card inserted into the unit is displayed.

<CFC INFORMATION> CFC

CAPACITY 128MB
START ---------- --	:--	:--
END ---------- --	:--	:--

MENU INFORMATION is appeared on the screen when there is recorded MENU INFORMATION.

2.Turn the SHUTTLE ring counterclockwise or press the SET UP button.

♦WARNING LOG LIST

The WARNING LOG LIST enables to check the number of failure, date, time and type of failure, etc.

<INFORMATION/SERVICE> (1/2)

HDD INFORMATION

CFC INFORMATION

>>WARNING LOG LIST

RESET TO FACTORY SETTINGS

MAIN HDD DATA CLEAR

SUB HDD DATA CLEAR

CFC DATA CLEAR

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• •••••••••••••

54