JVC HM-DR10000EU specifications Timer Programming

30ENTIMERRECORDING

SHOWVIEW®

Timer Programming

Before performing the SHOWVIEW Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Set the appropriate recording mode (D-VHS, S-VHS or VHS) (☞ pg. 22, 23).

●Turn on the TV and select the AV mode.

LCD panel

With the SHOWVIEW system, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognize.

ACCESS SHOWVIEW SCREEN

1	Press PROG.		SHOWVIEW
		[0 – 9] : SHOWVIEW
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER SHOWVIEW NUMBER

Press the NUMBER keys to	SHOWVIEW
enter the SHOWVIEW
	1 2 3 4 5 6 7 8
2 number of a programme
you wish to record, then
press OK.

●If you make a mistake,

LCD PROG

NUMBER

PROG

1

2

1

2

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

3 OK

press and input the	[0 – 9] =
correct number.	[ ] : DELETE
	[PROG] : EXIT

The SHOWVIEW number you enter appears on the front display panel:

The display panel can show only a 4-digit number.

ACCESS SHOWVIEW PROGRAM SCREEN

You can use the remote control with LCD panel to enter the SHOWVIEW number.

1		ACCESS SHOWVIEW DISPLAY
	Press LCD PROG.
	The LCD panel looks like this:
		ENTER SHOWVIEW NUMBER
	Press the NUMBER keys to enter the SHOWVIEW number
2		of a programme you wish to record, then press .

●If you make a mistake, press and input the correct number.

The SHOWVIEW number you enter appears on the LCD panel:

Then go to step 3 in the right column.

	The SHOWVIEW Program				– P1 –
	screen appears (if you’re			SHOWVIEW	123456789
3 just starting out, "P1"				START	STOP
			21:00		= 22:00
	appears).			SP(STD)	VPS/PDC OFF
	The display panel shows the
				DATE	TV PROG
	programme start time.
			25.12		1
	Pressing	changes the			ARD
	display to the programme
				: OK
	stop time, then the date and
	channel position.
				SP

IMPORTANT

Make sure the channel position number you wish to record is displayed; if not, see "SHOWVIEW® Setup" on page 69 and set the Guide Program number for that SHOWVIEW number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid SHOWVIEW number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 31.