JVC HM-DR10000EU specifications Perform Auto Channel SET, View Confirmation Screen

1

2

1

2

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

MENU

3 OK

6

7

EN63

PERFORM AUTO CHANNEL SET

Press OK twice.

● You can set up the			AUTO SET
recorder's tuner also			PLEASE WAIT
by Preset Download
(☞ pg. 8).	0		+	+		+
● The Auto Set screen
appears, and remains
on screen while the		[MENU] : EXIT
recorder searches
for receivable	Beginning					End
stations.
As Auto Channel Set progresses, the "					" mark on the

screen moves from left to right.

Wait until the screen as shown in step 7 appears.

VIEW CONFIRMATION SCREEN

After "SCAN COMPLETED"		PR	CH	ID	PR	CH ID
		01	25	ARD	08	C26 E-SP
is displayed on the screen
		02	C08	SKY1	09	55 WEST
for about 5 seconds, the	03		10	ZDF	10	C24 SAT1
Confirmation screen	04		C65	RAI1	11	C23 OSF
looking like the one to the	05		C31	BBC1	12	– – – –
	06		C32	BBC2	13	– – – –
right appears. The stations	07		C33	3SAT	14	– – – –
	[5°°°]
your recorder located
	=			: EDIT
appear on a Confirmation		= [X] : DELETE
screen — channel		[MENU] : EXIT
positions (PR), channels				C: Cable
(CH) and station names

(ID – ☞ pg. 67). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each.

To view the next page, use the %Þ@ #button on the remote control.

●The stations located in the selected country appear at the top of the list.

●The Guide Program numbers will also be set automatically during Auto Channel Set.

IMPORTANT

●In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly, when you timer-record a TV programme using SHOWVIEW, the recorder will record a TV programme of a different station. When programming the timer using SHOWVIEW, be sure to check whether the channel position on which your recorder receives the broadcasting station you wish to record is selected (☞ pg. 30, "SHOWVIEW® Timer Programming").

●Your video recorder memorizes all detected stations even if reception of some of them is poor. In these cases picture quality may be poor. To delete those stations with an unacceptable picture ☞ "Delete A Channel" on page 65.

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform it manually, refer to page 68.

●If you perform Auto Channel Set when the aerial cable is not connected properly, "SCAN COMPLETED -NO SIGNAL-" appears on the screen in step 7. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.

8

RETURN TO NORMAL SCREEN

Press MENU.

●Using the Confirmation screen, you can skip or add channel positions, enter station names and perform other operations. Refer to pages 64 – 68 for the procedures.

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●For information on scrambled broadcasts, refer to page 65.