JVC HM-DR10000EU specifications Edit From Camcorder

50EN

EDITING(cont.)

Edit From

A Camcorder

You can use a camcorder as the source player and your video recorder as the recorder.

You can perform digital editing if the camcorder has a DV output connector.

1	MAKE CONNECTIONS
	A If the camcorder has no S-VIDEO output connector...
	... connect the camcorder’s AUDIO/VIDEO OUT
	connectors to the recorder’s front panel AUDIO/
	VIDEO input connectors.

BIf the camcorder has an S-VIDEO output connector...

... connect the camcorder’s S-VIDEO OUT and AUDIO OUT connectors to the recorder’s front panel S-VIDEO and AUDIO input connectors.

AC If the camcorder has a DV OUT connector...

... connect the camcorder’s DV OUT connector to the recorder’s DV IN connector.

1– –:– –

2

1 2 3

4 5 6

7 8 9

3

4

4

See "DV Sound Setting" (☞ pg. 51) for the DV sound selection.

● When using a monaural camcorder, connect its

AUDIO OUT connector to the AUDIO L input

connector on your recorder.

● When a Master Edit Control-equipped JVC camcorder

is used, the camcorder is capable of controlling the

recorder. Refer to the camcorder’s instruction manual

NUMBER "0"

0

for operating procedure.

1

2

3

TV PROG

2		SET RECORDING MODE
	Set the appropriate recording mode (D-VHS, S-VHS or
		VHS) (☞ pg. 22, 23).
		SET RECORDER’S INPUT MODE
	Press NUMBER key "0" and/or TV PROG to select "F-1"
		for the AUDIO/VIDEO input connectors, "S-2" for the
		AUDIO/S-VIDEO input connectors, or "I-1" for the DV
3 input connectors, depending on the connectors being
		used.
		SET EDIT MODE (S-VHS/VHS
		MODE ONLY)
4 See "Picture Control" on page 49.
		START CAMCORDER
	Engage its Play mode.

NOTES:

●All necessary cables can be obtained from your dealer.

●You can also use another video recorder as the player instead of a camcorder.

●When you select EDIT to dub tapes in step 4, be sure to select AUTO (or NORM when B.E.S.T. is set to OFF) after you finish dubbing the tapes.

●When you are editing through the DV IN connector, the recorder will stop if the player begins playing a blank portion of tape or the signal is interrupted.

5

START RECORDER

6 Engage its Record mode.