Link | JVC LT-20DA6SK instruction

First of all choose the “Language” which the menus of the analogue part of the TV will ap- pear. As soon as you change the language, the menu items will be displayed in the se- lected language. By pressing the “ ” or

“” button, come to the “Country” item and select the country. This will affect the sort process in APS. Press RED button to start A.P.S.

After APS is finalized, a programme list will appear on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.

If you press the BLUE button at any time while the A.P.S. is running, the A.P.S. will be ended.

If you do not accept the locations and / or the programme names of programmes, you can change them in Program menu. For de- tails see PROGRAM menu on page 32.

If you do not have a T-V LINK compatible VCR, press MENU button to exit the menu.

If you have a T-V LINK compatible VCR con-

nected to the EXT-2 terminal, press “ ” button to display T-V LINK menu. Then fol- low the operating procedure “Downloading data to VCR” in the following T-V LINK sec- tion.

T-V LINK

When a T-V LINK compatible VCR con- nected to the EXT-2 terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

To use T-V LINK functions

A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. For details see your VCR instruction manual.

“Q-LINK” (A trademark of Panasonic Corpo- ration)

“Data Logic” (A trademark of Metz Corpora- tion)

“Easy Link” (A trademark of Philips Corpora- tion)

“Megalogic” (A trademark of Grundig Corpo- ration)

“SMARTLINK” (A trademark of Sony Corpo- ration)

Downloading data to VCR:

The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the programme channels on your VCR manually.

The “T-V LINK” menu will be displayed when

you press the “” button while PROGRAM menu is displayed.

If you do not have a T-V LINK compatible VCR, select Cancel and press “ ” or “OK” button to exit the menu.

Press “ ” or “OK” button to start download- ing data to VCR. “TRANSFER” is displayed in the menu.

If “FEATURE NOT AVAILABLE” is displayed, download was not performed correctly. Be- fore trying to download again, check that:

•The VCR power is turned on.

•The VCR is T-V LINK compatible.

•The VCR is connected to EXT-2.

•The scart cable is fully wired.

Direct REC:

You can easily record to VCR the images that you are watching on the TV. For details, read the manual for your VCR. Use your VCR controls you can not carry out Direct REC using your TV control.

When the VCR is not ready (For example when there is no tape inserted), “NO RE- CORDING” is displayed.

- 15 -