Tips
Can not turn the TV on?
Check that TV/VCR/DVD switch is set to TV position.
TV may go to
Can not turn the TV off?
Check that TV/VCR/DVD switch is set to TV position.
Care of the Screen
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Colours of image on screen are abnormal
Have you selected the correct TV system? Is your TV set or house aerial located too close to the loudspeakers,
Mountains or high buildings can cause double pictures or ghost images. Some- times you can improve the picture quality by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you have entered the correct fre- quency.
The picture quality may degrade when two peripherals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.
No Image on Display Screen
Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer.
No Image means that your TV is not receiv- ing any transmission. Have you pressed the correct buttons on the remote control? Try once more.
PC Picture
If no PC picture appears, check that the D- SUB cable is connected properly. Check that your PC’s resolution set correctly. See pages 43 for supported modes.
Sound
You can not hear any sound. Did you per-
haps interrupt the sound, pressing “” but- ton? Are external speakers connected to the TV?
Sound is coming from only one of the speakers. Is the balance set to one direction extreme? See Sound menu.
Remote Control
If your TV no longer responds to the remote control, perhaps the batteries are ex- hausted. Replace the batteries.
Have you selected the wrong menu? Press “MENU” button to return to normal screen or press “BACK” button to return to the previous menu.
No solution
If the TV suddenly stops responding, discon- nect the power cord of the TV from the AC outlet. Connect themto the AC outlet again to turn on the TV. If the TV returns to a normal state, it is not a failure. If this does not work, switch off, remove the mains plug and call the service personnel; never attempt to re- pair it yourself.
Bad picture (in digital mode)
Although this TV can receive both Digital ter- restrial broadcasting
If the picture freezes a lot, or block effect is seen frequently on screen, probably there is a problem with your reception.
Please contact customer services of your service provider if you are a subscriber.
- 44 -