Program Menu

•After stored, T-V LINK menu will appear. If you do not need to do T-V LINK, select Can-

cel and press “” or “OK” button to exit the menu.

Press "MENU" button, now you are in main menu. In the main menu, select “Program” using “ ” or “ ” button. Then enter the

Programme menu by pressing “” / “” or “OK” button.

Note: There is no Program menu in any EXT modes.

Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a chan- nel, and to start the A.P.S (Autostore) func- tion.

To choose a channel in the PROGRAM menu

Press “ ” / “ ” / “” / “ ” button. The programme number that you choose is high-lighted in the Program.

Caution:

Using “Delete” or “Insert” function rewrite the current channel list in the Program menu. Therefore, the

programme numbers of some of channels will change.

When you complete the settings of Program menu:

If you have a T-V LINK compatible VCR,

press “ ” button to display the T-V LINK menu. then follow the operating procedure “Downloading the data to VCR”.

If you do not have a T-V LINK compatible VCR,

select Cancel and press “” or “OK” button to exit the menu.

To give a channel name (Name):

1.Choose the channel you want to give a channel name.

2.Press the RED button to enter the Name mode.

3.Press “” or “ ” button to choose the

position,and press “ ” or “” button to choose each character of channel name.

4.Press the RED button to store the channel name.

•To cancel the Name mode, press the BLUE button.

To delete a channel (Delete):

1.Choose the channel you want to delete.

2.Press the YELLOW button to enter the De- lete mode.

3.Press the YELLOW button to delete it.

•To cancel the Delete mode, press the BLUE button.

To change the programme number of a channel (Insert)

1.Choose the channel you want to change the programme number.

2.Press the GREEN button to enter the In- sert mode.

3.Press “ ” / “ ” / “” / “” button to choose new programme number.

4.Press the GREEN button to Insert the channel to the chosen programme num- ber.

Autostore:

To enter Autostore menu, press the BLUE button. To learn the features of this function see “Autostore” below.

Autostore, searches and stores all channels

- 32 -