JVC LT-20DA6SK manual Feature Menu, Install Menu

Selecting Sound Mode

• Using “ ” or “ ” button select Sound Mode.

•Press “” or “ ” button to change Sound Mode.

You can choose Mono, Stereo or Dual (I-II) mode, only if the selected channel sup- ports that mode.

In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using mode option. So when somebody lis- tens to the original language from the loud- speakers, somebody else can listen to the dubbed language from headphone.

To Store The Settings

In the Sound Menu, all settings are stored automatically.

Feature Menu

Press “MENU” button, now you are in mainmenu. In the main menu, select Fea- ture using “ ” or “ ” button. Then enter

the Feature menu by pressing “” / “” or “OK” button.

Sleep Timer

The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed be- tween Off and 120 minutes in steps of 10 minutes. (Off, 010, 020, 030, 040, ... , 120)

If sleep timer is activated, at the end of the selected time, the TV goes automatically to stand-by mode.

Child Lock

You can use this feature to prevent children t u r n i n g t h e T V o n / o f f o r c h a n g i n g programmes or adjustments etc. without re- mote control.

•Using “ ” or “ ” button select Child Lock.

•Press “” / “” button to select Child Lock On or Off .

The Child Lock feature can be set On or Off

by “” / “” button. When Off is selected, there will be no difference in the operation of your TV. When On is selected, the TV can only be controlled by the remote control. In this case the control panel buttons except

“” button on the right side of the TV will not work.

Selecting Menu Language

•Using “ ” or “” button select Language.

•Press “” or “ ” button to select menu language.

EXT-2 Output

From EXT-2 Output; TV, EXT-1, EXT-4 or DIGITAL can be given. These modes can be

chosen by pressing “” or “ ” button on “EXT-2 OUTPUT”.

Blue Back (During No Signal)

The Blue Back Feature can be set by “” or “” button to either On or Off.

To Store Settings

In Feature menu all settings are stored auto- matically.

Install Menu

Press “MENU” button, now you are in main menu. In the main menu, select “Install” us- ing “” or “” button. Then enter the Install

menu by pressing “” / “” or “OK” button.

- 30 -