Kramer Electronics RC-SV manual Open the Kramer RC Configuration 2 program

Page 11

The RC Configuration Software

4.2.2Install the Drivers

The peripheral device drivers are installed via the Driver Manager window, defined in Figure 8 and Table 1:

To access the Driver Manager window:

1.Open the Kramer RC Configuration 2 program.

2.From the File menu, click Driver Manager.

The Driver Manager window appears (see Figure 5).

When open, the Driver Manager window lets you:

Import one or more drivers (Import Drivers…, see Figure 6), or export an existing driver (Export Driver…, see Figure 7)

Add a new device driver

Rename or delete devices, revisions and commands, as defined in Table 1

Set the driver revision date

Write new commands

Figure 5: The Driver Manager Window Prior to Installing the Drivers

7

Image 11

Contents RC-SV Configuration Guide Contents Figures Tables Overview IntroductionMicrosoft Windows XP is the recommended operating system3 Media Room Components List Initial PlanningInstalling the Software RC Configuration SoftwareInstall the Kramer RC Configuration 2 application Change Working Directory Window Downloading and Installing the DriversOpen the Kramer RC Configuration 2 program Define the Driver Manager window Driver Manager Window Feature Function Driver Manager Window FeaturesSerial Command type area appears, as illustrated in Figure Creating an IR Command Port Mapping IR Command Area WindowSony DVD Player in the RC Command Area Port Manager Window Features Kramer RC Configuration Main WindowDevice Area Kramer RC Configuration Window FeaturesShows the Event Macros Tab Shows the Toggle button behavior Switcher Port RC Command Area Creating a Macro Ignore Button Port RC Command AreaCreating a New Command Labeling the Buttons Setting the Delay Time and Button LightingSwitch to COMP1 Command Creating a Driver CommandRelay Command Turn Lights on Power Amplifier Command An LCD Keypad Command Ignore Button Command File Menu Kramer RC Configuration MenusFile Menu Features Edit Menu Configuration MenuEdit Menu Features Configuration Menu FeaturesConnect Dialog Box Device Menu FeaturesDevice Menu Help Menu Help Menu FeaturesLoad Firmware Load Firmware Upgrade Window SV-551Load Firmware Upgrade Window RC-6x Transforming to the Stand Alone Configuration Connecting a Room Controller as a Stand Alone Device MasterDevice Properties Window in the Stand Alone Mode Port Manager in the Stand Alone ModeLocal Area Connection Properties Window Connecting via the EthernetInternet Protocol TCP/IP Properties Window Writing a ConfigurationLoading a Configuration