Kramer Electronics RC-SV manual Load Firmware Upgrade Window RC-6x

Page 37

The Kramer RC Configuration Menus

Figure 48: Load Firmware Upgrade Window (RC-6x)

4.Connect to the device.

5.Click the Connect button to connect the device and then click Start Upgrade.

6.Upon completion, open the Device Properties window (see Figure 45) to make sure the firmware was upgraded1.

1 If the firmware number remains the same, close the Device Properties windows, disconnect and then reconnect the device, and open the Device Properties window again to check the firmware number

33

Image 37

Contents RC-SV Configuration Guide Contents Figures Tables Overview IntroductionMicrosoft Windows XP is the recommended operating system3 Media Room Components List Initial PlanningInstalling the Software RC Configuration SoftwareInstall the Kramer RC Configuration 2 application Change Working Directory Window Downloading and Installing the DriversOpen the Kramer RC Configuration 2 program Define the Driver Manager window Driver Manager Window Feature Function Driver Manager Window FeaturesSerial Command type area appears, as illustrated in Figure Creating an IR Command Port Mapping IR Command Area WindowSony DVD Player in the RC Command Area Port Manager Window Features Kramer RC Configuration Main WindowDevice Area Kramer RC Configuration Window FeaturesShows the Event Macros Tab Shows the Toggle button behavior Switcher Port RC Command Area Creating a Macro Ignore Button Port RC Command AreaCreating a New Command Labeling the Buttons Setting the Delay Time and Button LightingSwitch to COMP1 Command Creating a Driver CommandRelay Command Turn Lights on Power Amplifier Command An LCD Keypad Command Ignore Button Command File Menu Features Kramer RC Configuration MenusFile Menu Edit Menu Features Configuration MenuConfiguration Menu Features Edit MenuDevice Menu Device Menu FeaturesConnect Dialog Box Help Menu Help Menu FeaturesLoad Firmware Load Firmware Upgrade Window SV-551Load Firmware Upgrade Window RC-6x Transforming to the Stand Alone Configuration Connecting a Room Controller as a Stand Alone Device MasterDevice Properties Window in the Stand Alone Mode Port Manager in the Stand Alone ModeLocal Area Connection Properties Window Connecting via the EthernetInternet Protocol TCP/IP Properties Window Writing a ConfigurationLoading a Configuration