Kramer Electronics RC-SV manual An LCD Keypad Command

Creating a Macro

5.2.5An LCD Keypad Command

The LCD Keypad command lets you type-in the desired text to the LCD displays (LCD 1 and LCD 2).

To write an LCD keypad command on an RC button, do the following:

1.Select the KEYPAD_LCD Port (1 or 2).

2.In the RC command area, write the command description (for example, Switcher).

3.Type-in the desired text.

Figure 34 illustrates the RC Command area as it appears after writing the command:

Figure 36: Keypad LCD RC Command

5.2.6Setting the Button State and Color

To write a Button Color command on an RC button, do the following:

1.Select the BUTTON_COLOR Port.

2.In the RC command area, write the command description (for example, Change Color).

3.Select the Button ID (from 1 to 6) to which this command refers1.

4.Set the state of the button (On, Off, Fast Blink, Slow Blink), for example, On.

5.Set the Button Color (see Figure 38).

Figure 37 illustrates the RC Command area as it appears after writing the command:

1 For example, the command is written to button 1 but refers to an action taken for button 4

26 KRAMER: SIMPLE CREATIVE TECHNOLOGY