Kramer Electronics RC-SV manual Power Amplifier Command

Page 29

Creating a Macro

Figure 34: Switcher RC Command

5.2.4A Power Amplifier Command

To write a power amplifier command1 on an RC button, do the following:

1.Select the POWER_AMP Port.

2.In the RC command area, write the command description (for example, High Volume).

3.Select the power amplifier command (for example, Volume set).

4.Move the sliding switch to the desired volume (for example, 12dB).

Figure 34 illustrates the RC Command area as it appears after writing the command:

Figure 35: High Volume RC Command

1 For the Master-Slave configuration only

25

Image 29

Contents RC-SV Configuration Guide Contents Figures Tables Overview IntroductionMicrosoft Windows XP is the recommended operating system3 Media Room Components List Initial PlanningInstalling the Software RC Configuration SoftwareInstall the Kramer RC Configuration 2 application Change Working Directory Window Downloading and Installing the DriversOpen the Kramer RC Configuration 2 program Define the Driver Manager window Driver Manager Window Feature Function Driver Manager Window FeaturesSerial Command type area appears, as illustrated in Figure Creating an IR Command Port Mapping IR Command Area WindowSony DVD Player in the RC Command Area Port Manager Window Features Kramer RC Configuration Main WindowDevice Area Kramer RC Configuration Window FeaturesShows the Event Macros Tab Shows the Toggle button behavior Switcher Port RC Command Area Creating a Macro Ignore Button Port RC Command AreaCreating a New Command Labeling the Buttons Setting the Delay Time and Button LightingSwitch to COMP1 Command Creating a Driver CommandRelay Command Turn Lights on Power Amplifier Command An LCD Keypad Command Ignore Button Command File Menu Kramer RC Configuration MenusFile Menu Features Edit Menu Features Configuration MenuConfiguration Menu Features Edit MenuConnect Dialog Box Device Menu FeaturesDevice Menu Help Menu Help Menu FeaturesLoad Firmware Load Firmware Upgrade Window SV-551Load Firmware Upgrade Window RC-6x Transforming to the Stand Alone Configuration Connecting a Room Controller as a Stand Alone Device MasterDevice Properties Window in the Stand Alone Mode Port Manager in the Stand Alone ModeLocal Area Connection Properties Window Connecting via the EthernetInternet Protocol TCP/IP Properties Window Writing a ConfigurationLoading a Configuration