Kramer Electronics RC-SV manual Loading a Configuration

Writing a Configuration

To write a configuration to the device, do the following:

1.Connect the PC to the:

￿RC-6x(stand alone) to write the configuration directly to the RC-6x

￿SV-551(in a SummitView™ kit setup) to write the configuration to the SV-551

2.From the File menu, select Load Configuration1¼ . The Open window appears (see Figure 55).

3.Click Open1

4.In the Device area in the RC Configuration 2 main window, click the Write Configuration button2.

The configuration is written to the device.

Figure 55: Loading a Configuration

1 Skip this step if you have the desired configuration loaded

2 The Write Configuration button is enabled only when the device is connected

38 KRAMER: SIMPLE CREATIVE TECHNOLOGY