Kramer Electronics RC-SV manual Ignore Button Command

Page 31

Creating a Macro

Figure 37: Change Color RC Command

Figure 38: Select Button Color

5.2.7The Ignore Button Command

To write a Button Ignore command (see Figure 39) on an RC button (for example, button 1), do the following:

1.Select the IGNORE BUTTON Port.

2.In the RC command area, write the command description (for example, Ignore Button 4).

3.Select the Button ID (from 1 to 6) to which this command refers1, for example button 4.

4.Set the state of the button (Ignore, Unignore), for example, Ignore.

1 For example, the command is written to button 1 but refers to an action taken for button 4

27

Image 31

Contents RC-SV Configuration Guide Contents Figures Tables Overview IntroductionMicrosoft Windows XP is the recommended operating system3 Media Room Components List Initial PlanningInstalling the Software RC Configuration SoftwareInstall the Kramer RC Configuration 2 application Change Working Directory Window Downloading and Installing the DriversOpen the Kramer RC Configuration 2 program Define the Driver Manager window Driver Manager Window Feature Function Driver Manager Window FeaturesSerial Command type area appears, as illustrated in Figure Creating an IR Command Port Mapping IR Command Area WindowSony DVD Player in the RC Command Area Port Manager Window Features Kramer RC Configuration Main WindowDevice Area Kramer RC Configuration Window FeaturesShows the Event Macros Tab Shows the Toggle button behavior Switcher Port RC Command Area Creating a Macro Ignore Button Port RC Command AreaCreating a New Command Labeling the Buttons Setting the Delay Time and Button LightingSwitch to COMP1 Command Creating a Driver CommandRelay Command Turn Lights on Power Amplifier Command An LCD Keypad Command Ignore Button Command File Menu Features Kramer RC Configuration MenusFile Menu Edit Menu Configuration MenuEdit Menu Features Configuration Menu FeaturesDevice Menu Device Menu FeaturesConnect Dialog Box Help Menu Help Menu FeaturesLoad Firmware Load Firmware Upgrade Window SV-551Load Firmware Upgrade Window RC-6x Transforming to the Stand Alone Configuration Connecting a Room Controller as a Stand Alone Device MasterDevice Properties Window in the Stand Alone Mode Port Manager in the Stand Alone ModeLocal Area Connection Properties Window Connecting via the EthernetInternet Protocol TCP/IP Properties Window Writing a ConfigurationLoading a Configuration