Kramer Electronics RC-SV manual Help Menu Features

Page 35

The Kramer RC Configuration Menus

6.4.2The Device Properties Dialog Box

To connect a device, open the Device menu and click Properties. The Device Properties window Appears (see Figure 45). Figure 52 shows the Device Properties window in the stand alone setup.

Table 10: Connect Dialog Box

Feature	Function
Name, IP, Gateway,	If required, change information.
Mask
Model, Serial number,	Displays information.
Port, Firmware, K-Net-
ID, MAC,
DHCP1 Enabled	Check box to enable operation in
	the DHCP mode.
	When in the DHCP mode, you
	can only change the name of the
	device.
	This process may take several
	minutes and will cause an
	automatic restart on the device.

Figure 45: Device Properties Window

6.5 The Help Menu

Figure 46 illustrates the Help menu and Table 11 defines it:

Table 11: Help Menu Features

Menu Command	Function
Check for updates	Search the Kramer
	Electronics Web site for
	software updates.
About Kramer RC	Shows the current software
Configuration	version.

Figure 46: The Help Menu

1 Dynamic Host Configuration Protocol: Allows the network administrator to distribute IP addresses from a central point and automatically send a new IP address when an Ethernet point is plugged into a different network location

31

Image 35

Contents RC-SV Configuration Guide Contents Figures Tables Overview IntroductionMicrosoft Windows XP is the recommended operating system3 Media Room Components List Initial PlanningInstalling the Software RC Configuration SoftwareInstall the Kramer RC Configuration 2 application Change Working Directory Window Downloading and Installing the DriversOpen the Kramer RC Configuration 2 program Define the Driver Manager window Driver Manager Window Feature Function Driver Manager Window FeaturesSerial Command type area appears, as illustrated in Figure Creating an IR Command Port Mapping IR Command Area WindowSony DVD Player in the RC Command Area Port Manager Window Features Kramer RC Configuration Main WindowDevice Area Kramer RC Configuration Window FeaturesShows the Event Macros Tab Shows the Toggle button behavior Switcher Port RC Command Area Creating a Macro Ignore Button Port RC Command AreaCreating a New Command Labeling the Buttons Setting the Delay Time and Button LightingSwitch to COMP1 Command Creating a Driver CommandRelay Command Turn Lights on Power Amplifier Command An LCD Keypad Command Ignore Button Command File Menu Kramer RC Configuration MenusFile Menu Features Edit Menu Configuration MenuEdit Menu Features Configuration Menu FeaturesConnect Dialog Box Device Menu FeaturesDevice Menu Help Menu Help Menu FeaturesLoad Firmware Load Firmware Upgrade Window SV-551Load Firmware Upgrade Window RC-6x Transforming to the Stand Alone Configuration Connecting a Room Controller as a Stand Alone Device MasterDevice Properties Window in the Stand Alone Mode Port Manager in the Stand Alone ModeLocal Area Connection Properties Window Connecting via the EthernetInternet Protocol TCP/IP Properties Window Writing a ConfigurationLoading a Configuration