Connecting a Room Controller as a Stand Alone Device (Master)
7Connecting a Room Controller as a Stand Alone Device (Master)
You can configure the Room Controller to be used as a standalone device. To do this you have to connect the Room controller directly to your PC via the USB connector.
To define the RC as a Master device:
1.From the Device Menu, click Connect¼ .
2.Select the connection method to be USB, select the port and click OK. The following warning appears:
Figure 49: Transforming to the Stand Alone Configuration
3.Click Yes.
The room controller is now stand alone and the Device description appears as follows:
Figure 50: Standalone Device Description
When in the stand alone mode, you can write the command sequences directly to the room controller by clicking the Write Configuration button in the Device area (see section 9) .
The following windows will appear differently when in the standalone mode:
The Port Manager window, see section 7 .1
The Device Properties window, see section 7 .2
34 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |