JVC BM-H1310SU, BM-H1900SU manual SET-UP for Monitor Installation

Page 16

SET-UP FOR MONITOR INSTALLATION (continued)

STATUS DISPLAY (setting the status display to on/off)

When the power is turned on or the input mode is switched, the status display (color system and input mode) appears on screen. The display can be set to on or off.

Setting	Function
ON	Status display appears.

OFF	Status display does not appear.

CONTROL LOCK (deactivation of front-control functions)

Set CONTROL LOCK to ON on screen to deactivate the front-control functions (front VOLUME control and remote volume control are operable).

Setting	Function
ON	Deactivates the front controls
	(except front/remote volume controls).

OFF	Releases deactivated functions.

NOTE

●If you attempt to operate a locked function, “CONTROL LOCK ON!!” appears on screen for approx. 2 seconds to indicate the function cannot be operated.

●Once CONTROL LOCK is deacti- vated, the current settings of the front-control knobs and buttons are activated.

●If the power is turned off with CONTROL LOCK activated, the function is kept in memory.

16

Image 16

Contents BM-H1310SU Safety Precautions InformationContents FeaturesControls and Features Front Terminals and Features Rear Connection Example RGB/COMPOSDI terminal settingExternal/internal synchronization Basic Operation To demagnetize the picture tubePicture Adjustments Phase picture hueContrast picture contrast Bright picture brightnessVideo Signal Controls Push each switch to on or OFF for video signal controlCalling up the menu display, selecting an item Aspect Ratio picture aspect ratio switchingFilter Select built-in filter selection AFC switching of time constant for the AFC Color TEMP. color temperature switchingNtsc Setup Ntsc set-up level COMPO. Level chrominance level settingRevision of memory mode Memory Mode Variable setting rangeSET-UP for Monitor Installation To call up SET-UP Menu and select a functionRemote Select TALLY/REMOTE-terminal settings Input setting indications and selected inputsCNTL-1/CNTL-2 setting indications and set positions TALLY/REMOTE terminal functionsSET-UP for Monitor Installation Status Display setting the status display to on/offTo initialize Menu settings only Picture Setting InitializationTo initialize both MENU/SET-UP Menu settings Remote Controls Picture adjustmentsSound adjustments On-screen menu remote operationTo program an ID number use front controls To assign a monitor use remote controlTo call up an ID number use remote unit Before Calling for Service Menu Display Chart ¥ + MenuSpecifications RGB / Compo SDIDimensions BM-H1900SU / BM-H1310SU Color Video Monitor