JVC BM-H1900SU, BM-H1310SU manual Terminals and Features Rear

TERMINALS AND FEATURES (REAR)

(Rear)

2 3 8 9 w

4

5

IN	VIDEO A	OUT
OPEN	75 ¶
	VIDEO B
OPEN	75 ¶
	SYNC
OPEN	75 ¶

7

IN

	OUT	IN	AUDIO
Y / C			OUT
OPEN	75 ¶
RGB/COMPO(SDI)
G / Y
OPEN	75 ¶
B / B-Y
OPEN	75 ¶
			TALLY/
R / R-Y		FOCUS	REMOTE
OPEN	75 ¶

e

r

1

6 p q t y

1Power socket

Connect to an AC outlet (120 V AC, 50 Hz / 60 Hz) using the provided power cord.

2VIDEO A terminals

Composite video signal input terminal and bridge- connected output terminal.

3VIDEO A termination switch

Set to OPEN for bridged connection; set to 75 Ω for input signal only.

4VIDEO B terminals

Composite video signal input terminal and bridge- connected output terminal.

qRGB/COMPO(SDI) termination switch

Functions as for 3.

wAUDIO A terminals

Audio signal input terminal and bridge-connected output terminal. Linked with the VIDEO A terminals so that AUDIO A terminals and VIDEO A terminals are selected simultaneously.

eAUDIO B terminals

Audio signal input terminal and bridge-connected output terminal. Linked with the VIDEO B or Y/C terminals so that AUDIO B terminals and VIDEO B or Y/C terminals are selected simultaneously.

5VIDEO B termination switch

Functions as for 3.

6SYNC terminals

External sync signal input terminal and bridge-connected output terminal. Input an external composite sync signal to these terminals when inputting a video signal without a sync signal, or when synchronizing the monitor with an external sync signal.

7SYNC termination switch

Functions as for 3.

8Y/C terminals

Input terminal of Y/C signals and bridge-connected output terminal.

rAUDIO RGB/COMPO(SDI) terminals

Audio signal input terminal and bridge-connected output terminal. Linked with the RGB/COMPO(SDI) terminals so that AUDIO RGB/COMPO(SDI) terminals and RGB/ COMPO(SDI) terminals are selected simultaneously.

tFOCUS control

Adjustment hole exclusively for use by service personnel. Make sure to consult qualified service personnel for adjustment.

yTALLY/REMOTE terminal

External input terminal of a tally signal to make the tally lamp glow, or of a remote-control signal to switch input or picture control.

9Y/C termination switch

Functions as for 3.

pRGB/COMPO(SDI) terminals

Input terminal of analog RGB signals or Y/B-Y/R-Y signals and bridge-connected output terminal. For analog RGB signals, also accepts a G signal including a sync signal.

5