JVC BM-H1310SU, BM-H1900SU Remote Controls, On-screen menu remote operation, Picture adjustments

Page 18

REMOTE CONTROLS

The optional wireless remote control unit (RM-C550W) operates the following:

●On-screen menu functions (MENU, SET-UP MENU, etc.)

●Picture adjustments (CONTRAST, BRIGHT, CHROMA, PHASE)

●Sound adjustments (VOLUME, MUTE)

On-screen menu remote operation

Remote keys and front controls with the same designation share the common functions. For detailed operation, see instructions about each menu function in this manual.

Picture adjustments

Each adjustable range depends on the setting of the front CONTRAST/ BRIGHT/CHROMA or PHASE control. If an adjustment is made via remote control with the front control set approximately to the maximum or minimum, the level may indicate a certain change on screen but may not actually increase or decrease.

1. Press the PICTURE key to display PICTURE ADJUST.

2. Press the ▲ or ▼ key to select an item.

3. Press the or key to change the level:

: Moves the cursor to left (to decrease the level).

: Moves the cursor to right (to increase the level).

4. Press the ▲ or ▼ key to another item and repeat step 3.

5. Press the PICTURE key to complete.

NOTE

●When monitoring the picture of analog RGB signals, component signal or black-and-white signal, CHROMA and PHASE do not appear and cannot be adjusted.

●When a video signal of the PAL sys- tem is input to the monitor, PHASE does not appear and cannot be ad- justed.

qP I CTURE ADJUST r

CONTRAST

:0

BR I GHT

:0

CHROMA

:0

PHASE

:0

ENTER

:

●To standardize all settings on PICTURE ADJUST: After step 1, press the RESET key.

Sound adjustments

A variable range depends on the setting of the front VOLUME control. If audio level is remote-controlled with front VOLUME control set approxi- mately to the maximum or minimum, the level may indicate a certain change on screen but may not actually increase or decrease.

●Press the VOLUME – or + key to decrease or increase the level (within ±20).

●Press the MUTE key to mute the sound. MUTE appears on screen for approx. 3 seconds. Press again to release.

NOTE

●Each time the PICTURE key is pressed, the previous display is restored.

VOLUME: @+01

NOTE

●If the power is turned off with sound- muting activated, the function is kept in memory.

●To release sound-muting, turn the front VOLUME control or press the remote VOLUME – or + key .

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents BM-H1310SU Safety Precautions InformationContents FeaturesControls and Features Front Terminals and Features Rear RGB/COMPOSDI terminal setting Connection ExampleExternal/internal synchronization Basic Operation To demagnetize the picture tubeContrast picture contrast Picture AdjustmentsPhase picture hue Bright picture brightnessVideo Signal Controls Push each switch to on or OFF for video signal controlAspect Ratio picture aspect ratio switching Calling up the menu display, selecting an itemFilter Select built-in filter selection Ntsc Setup Ntsc set-up level AFC switching of time constant for the AFCColor TEMP. color temperature switching COMPO. Level chrominance level settingRevision of memory mode Memory Mode Variable setting rangeSET-UP for Monitor Installation To call up SET-UP Menu and select a functionCNTL-1/CNTL-2 setting indications and set positions Remote Select TALLY/REMOTE-terminal settingsInput setting indications and selected inputs TALLY/REMOTE terminal functionsSET-UP for Monitor Installation Status Display setting the status display to on/offPicture Setting Initialization To initialize Menu settings onlyTo initialize both MENU/SET-UP Menu settings Sound adjustments Remote ControlsPicture adjustments On-screen menu remote operationTo assign a monitor use remote control To program an ID number use front controlsTo call up an ID number use remote unit Before Calling for Service Menu Display Chart ¥ + MenuSpecifications RGB / Compo SDIDimensions BM-H1900SU / BM-H1310SU Color Video Monitor
Top Page Image Contents