JVC BM-H1900SU, BM-H1310SU manual Picture Setting Initialization, To initialize Menu settings only

Page 17

PICTURE SETTING INITIALIZATION

The MENU and/or SET-UP MENU settings, including changes added later by the user, can be reset (initialized) to their initial (default) settings.

To initialize MENU settings only

MENU settings (except MEMORY MODE and RGB/COMPO(SDI)) can be exclusively reset:

1. With the ▼ button pressed, press the MENU button to display 1 on screen.

2. ● Press the ENTER button to reset.

● Press the or button to cancel.

●MENU and PICTURE ADJUST settings (except MEMORY MODE and RGB/COMPO(SDI)) can also be simultaneously reset via the optional wireless remote control unit:

1.Press the MENU key to display MENU on screen.

2.Press the RESET key to execute.

To initialize both MENU/SET-UP MENU settings

MENU and SET-UP MENU settings other than MEMORY MODE and RGB/COMPO(SDI) can be reset at the same time. In this case, PICTURE ADJUST settings via remote control are also reset, and the monitor’s ID number is also reset to 00.

1. Press the POWER switch to turn the power off.

2. With the ▼ and MENU buttons pressed, press the POWER switch to turn the power on. Keep pressing the ▼ and MENU buttons until 2 appears on screen.

3. Press the ▲ or ▼ button to select SET-UP MENU RESET. Then press the ENTER button to display 3 on screen.

4. ● Press the ENTER button again to execute.

●Press the or button to cancel.

NOTE

●For initial (default) MENU settings, see page 21.

qMENU rRESET

Are you sure ?

gYes hthenENTER

gNo h then or

1

qIN I T I AL IZE MENU r

ID NUMBER SET qSET-UP MENU rRESET

ENTER

2

qSET-UP MENU rRESET

Are you sure ?

gYes hthenENTER

gNo h then or

3

17

Image 17

Contents BM-H1310SU Information Safety PrecautionsFeatures ContentsControls and Features Front Terminals and Features Rear External/internal synchronization RGB/COMPOSDI terminal settingConnection Example To demagnetize the picture tube Basic OperationPhase picture hue Picture AdjustmentsContrast picture contrast Bright picture brightnessPush each switch to on or OFF for video signal control Video Signal ControlsFilter Select built-in filter selection Aspect Ratio picture aspect ratio switchingCalling up the menu display, selecting an item Color TEMP. color temperature switching AFC switching of time constant for the AFCNtsc Setup Ntsc set-up level COMPO. Level chrominance level settingRevision of memory mode Variable setting range Memory ModeTo call up SET-UP Menu and select a function SET-UP for Monitor InstallationInput setting indications and selected inputs Remote Select TALLY/REMOTE-terminal settingsCNTL-1/CNTL-2 setting indications and set positions TALLY/REMOTE terminal functionsStatus Display setting the status display to on/off SET-UP for Monitor InstallationTo initialize both MENU/SET-UP Menu settings Picture Setting InitializationTo initialize Menu settings only Picture adjustments Remote ControlsSound adjustments On-screen menu remote operationTo call up an ID number use remote unit To assign a monitor use remote controlTo program an ID number use front controls Before Calling for Service ¥ + Menu Menu Display ChartRGB / Compo SDI SpecificationsDimensions BM-H1900SU / BM-H1310SU Color Video Monitor