JVC BM-H1310SU, BM-H1900SU manual Revision of memory mode

MEMORY MODE

A set of picture settings can be programmed in memory for quick recall when necessary.

Recall/release of memory mode

Press the MEMORY MODE switch to recall a set of picture settings programmed in memory.

Pressing the switch locks the functions of the front-panel PHASE, CHROMA, BRIGHT, CONTRAST controls, and remote-control picture adjustments not to be operated.

Press again to release memory mode.

Setting programming of the picture being monitored

The settings of the picture being monitored can be programmed in memory.

NOTE

● If you attempt to operate a locked function, “MEMORY MODE ON!!” appears on screen for approx. 2 seconds to indicate the function cannot be operated.

NOTE

● Programmed picture settings are kept in memory after the power is turned off.

		Settings programmable in memory mode:
● Settings of the CONTRAST, BRIGHT, CHROMA and PHASE controls on the			qMEMORY MODE r
	front panel
● On-screen menu function settings (except RGB/COMPO(SDI))			Are you sure ?
● Remote-control picture adjustment settings
			ENTER
			gYes hthen
1.	Check the MEMORY MODE switch is off.		gNo h then or
2.	Press the MENU button.
3.	Press the ▲ or ▼ button to select MEMORY MODE.
4.	Then press the ENTER button.
	● Press the ENTER button to program.

● Press the or button to cancel.

	NOTE
Revision of memory mode	● No matter what video signal is input,
	all items appear on screen. How-
Programmed picture settings can be revised if necessary.	ever, depending on the type of input
	video signal, some functions might
1. Press the MEMORY MODE switch to activate memory mode.
	not operate even if their settings are
2. Press the MENU button to call up display 1 on screen.	made.
	qMEMORY MODE REV I SE
	P I CTURE AD JUSTMENT
	ASPECT	RAT I O		:4-3
	F I LTER	SELECT		:COMB
	PEAK I NG		FREQ.	:2.6MHZ
	PEAK I NG		LEVEL	:0dB
	AFC			:NORMAL
	COLOR	TEMP.		:6500
	NTSC	SETUP		:7.5
	COMPO. LEVEL			:BETA75
	ENTER			:
			1

12