![](/images/new-backgrounds/1017009/1700925x1.webp)
RCS 2.2X Connections
Analog output | The RCS 2.2X has 2 analog outputs for subwoofer(s) when the optional |
subwoofer(s) | module is installed: |
(optional DAC module) |
|
| - one analog stereo single ended (RCA) |
| - one analog stereo balanced (XLR) |
| NOTE: The optional DAC module is required for analog outputs. |
Microphone input
Connect the supplied measurement microphone to the “Mic Input” connector when taking a room measurement for room correction.
CAUTION: To avoid damage through static discharge, we strongly recommend to turn off the RCS 2.2X at the rear panel mains switch before connecting the microphone.