![](/images/new-backgrounds/1017009/1700953x1.webp)
| Front Panel Display |
| NOTE: When a TacT digital amplifier is controlled by the RCS 2.2X, all of |
| the amplifiers front panel and IR controls are disabled. Use the RS232 port |
| and/or daisy chain to link the components. |
| CAUTION: The AMP setting should only be set to ENABLED if you have Tact |
| amplifiers connected to the RCS 2.2X. When the AMP option set to ENABLED |
| both the analog and digital output with will output a full level signal regard- |
| less of the RCS 2.2X master volume setting. If you do not have Tact amplifiers |
| connected to your system you will not be able to control the output level |
| from the RCS 2.2X volume control. The output is sent at its maximum level |
| and can result in damage to your speakers. |
CORR menu | The correction menu allows for control of all the room correction parameters. To |
| highlight an option use the navigation buttons and select it by pressing the |
| “ENTER” button. |
1 - LEVELS , DELAYS and NAMES are menu options. To enter one of these menu options highlight it using the navigation buttons and then press the “ENTER” button to select it.
2 - CORR - This option allows for correction selection. When this option is highlighted use the “LEFT” and “RIGHT” navigation buttons to scroll through all possible correction presets. To select the displayed preset press the “ENTER” button. Note that the “*” character indicates the currently selected correction preset.
3 - LOCK - This option allows you to lock the correction preset setting. When this option is highlighted use the “ENTER” button to toggle between the “YES” and “NO” options. When “YES” is displayed the selected room correction preset is locked and can not be changed by either front panel or remote control.
4 - Active Corr. - This displays the currently selected room correction preset number.
4 - Name - This displays the currently selected room correction symbolic name.