TacT Audio RCS 2.2X owner manual Options menu

Page 25

 

Front Panel Display

OPTIONS menu

The options menu allows for control of the systems maximum signal level, signal

 

detection threshold (SDTH), wheel speed, and remote control. To select an option

 

highlight it using the “UP” and “DOWN” navigational buttons. To modify a selected

 

option use the “LEFT” and “RIGHT” buttons.

-Max Level - This option controls the systems maximum signal level. For example, if this option is set to -3.0 dB, the volume control can not go above -3.0 dB.

-Detection - This option sets the signal detection threshold. If the absolute value of the Left or the Right channel signal goes above this threshold the red signaling dot will be displayed on the front panel bellow the master volume display. This feature can be used to indicate signal presence on either channel or to indicate near clip condition. To use it as a signal presence indicator set the Detection to a value close to -90.0 dB. To use it as near clip indicator set the Detection to a value close to 0.0 dB.

NOTE: This light does not indicate clip condition.

-Wheel - This option sets the wheel sensitivity. The wheel sensitivity can be set to between 1 and 10 or to “OFF” to disable the Wheel for volume control. The lower the setting the slower the volume increases and the higher the setting the faster the volume increases with each turn of the Wheel.

-Remote - This option enables and disables the remote control. Once the remote control is disabled the unit can only be con trolled from the front panel.

Tact Audio 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents RCS Blank Tact Audio Page Registration AcknowledgmentsTable of contents Unpacking the RCS Accessories Operating voltageIntroduction Modular design True UpgradeabilityDigital input Digital output 1 main channels Tact Audio RCS 2.2X ConnectionsSubwoofers RCS 2.2X Connections Digital outputOptional modules RCS 2.2X Connections Analog input Optional DAC module RCS 2.2X Connections Analog outputMicrophone input RCS 2.2X Connections RS-232 interface AC mains input & mains switchPorts Front panel controls Remote Control Correction block Volume BlockMain screen Tact Audio Front Panel DisplaySettings Tone controls are disabledFront Panel Display Correction menu option Saving MenuStereo Mode menuMono DOUT-FS menu Assigned to each input independentlyTest menu Front Panel Display POL menuFront Panel Display Display menu CRO menu Options menu Attached to the RCS AMP menuCan result in damage to your speakers And/or daisy chain to link the componentsFront Panel Display Levels menu MsecEnter button Front Panel Display Parametric EQ menu Table Linked Front Panel Display Parametric EQFront Panel Display Tone menu Your computer system must meet the following requirements TacT 2.2X Room Correction SoftwareRCS 2.2X to your Connect yourComputer Before You Begin Getting Started Quick SetupSelect Quick SetupStep Step Step Update the RCS-2.2 X Firmware Status Ready Update the Tact-2.2 X FirmwareUpdate the Tact-2.2 X Firmware Tact Audio TacT Audio, Inc

RCS 2.2X specifications

TacT Audio, a pioneering name in the audiophile community, has made significant waves with its innovative product: the RCS 2.2X. This digital room correction system is designed to take your audio experience to a new level, making it a must-have for anyone serious about optimizing sound reproduction in their listening environment.

At the heart of the RCS 2.2X is its state-of-the-art digital signal processing technology. This advanced processing capability allows the device to analyze the acoustic characteristics of your room and adjust the audio output accordingly. By using sophisticated algorithms, the RCS 2.2X can correct frequency response deviations caused by room acoustics, ensuring that you experience your music exactly as the artist intended.

One of the standout features of the RCS 2.2X is its ability to provide customized room correction. Unlike many other systems that offer a one-size-fits-all solution, the RCS 2.2X tailors its corrections based on precise measurements taken from your specific listening environment. Utilizing a calibrated microphone, the system performs a series of measurements and graphically represents the room's acoustic challenges. This personalized approach results in a dramatically improved audio experience, with clearer highs, tighter bass, and a more immersive soundstage.

The RCS 2.2X supports high-resolution audio formats, including 24-bit/192kHz PCM, enhancing its compatibility with various digital sources. It features multiple digital and analog inputs, allowing for seamless integration into existing audio setups. This flexibility ensures that both modern and traditional audiophiles can benefit from the enhanced sound quality provided by this device.

In addition to its room correction capabilities, the RCS 2.2X boasts a powerful crossover function that enables users to create multi-channel audio setups with ease. This feature is particularly useful for home theater enthusiasts looking to optimize the performance of their surround sound systems.

Moreover, the RCS 2.2X includes an easy-to-use interface. It provides a user-friendly setup process, making it accessible even for those who may not be technically inclined. The ability to view real-time frequency response graphs further enhances user engagement and understanding of the acoustic adjustments being made.

In summary, the TacT Audio RCS 2.2X is a groundbreaking tool designed to elevate audio quality through advanced digital room correction technology. With its customizable corrections, high-resolution audio support, and versatile connectivity options, it stands out as a leader in the audio enhancement landscape. Whether you're a casual listener or a seasoned audiophile, the RCS 2.2X promises to redefine your listening experience, making every note and nuance resonate like never before.
Top Page Image Contents