Quick Setup, Before You Begin Getting Started

Before You Begin

Getting Started

Quick Setup

The Tact 2.2X Quick Setup wizard is designed to help both the first time and experienced user perform complete room correction and create nine correction presets quickly and easily. To run the Quick Setup successfully you will need to know your speaker configuration, your loudspeakers lower cut-off frequency, and the type of amplifier(s) that you have connected. This information will allow the Quick Setup to automate the room correction process for you so that you can begin enjoying the benefits of room correction immediately. For a detailed explanation of all of the software features and instruction for performing room correction manually please see the online help available in the software.

1 - Connect the RS 232 “Input” jack on the back of the RCS-2.2 X to your computers serial port using the supplied cables and adapters.

NOTE: These instructions assume that you have already established communication between the RCS 2.2X and the Room Correction Software on your computer. See page 32.

2 - If you have one or more TacT M2150/S2150 digital amplifiers connect them to the RCS 2.2X. Please make sure that a unique address has been set for each device. For further instructions please refer to your M2150/S2150 owner’s manual.

3 - Make sure that the RCS-2.2 X is powered off from the rear panel mains switch and connect the supplied measurement microphone to the “Mic Input” connector on the back of the RCS-2.2 X. Place the mic at the primary listening position at the height of your head. This will require a microphone stand, or something similar.

CAUTION: To avoid damage through static discharge, we strongly recommend to turn off the RCS-2.2 X at the rear panel mains switch before connecting the microphone.

4 - Turn your RCS-2.2 X on.

5 - Set the Mode setting for the RCS-2.2 X from the units front panel. This is the speaker configuration your system will be using. Please refer to page 18 for more information and instructions.

6 - Turn on your computer and start the TacT-2.2 X Correction System Software. If you have not installed the software please see page 31 for instructions.

7 - Enable your microphone if you are using the Tact microphone that came with your unit. To enable or disable the microphone click on the “mic:” display window found on the main screen with your left mouse button to toggle its setting. When the microphone number is displayed it is enabled. If you have not installed your microphone please see page 31 for instructions.

Start the Quick Setup by selecting the yellow “Quick Setup” button located on the Tact-2.2 X Room Correction System main window.

The Tact-2.2 X Quick Setup wizard is broken into three steps. As you complete each step select the “NEXT” button move to the next step.

Tact Audio 35

RCS 2.2X specifications

TacT Audio, a pioneering name in the audiophile community, has made significant waves with its innovative product: the RCS 2.2X. This digital room correction system is designed to take your audio experience to a new level, making it a must-have for anyone serious about optimizing sound reproduction in their listening environment.

At the heart of the RCS 2.2X is its state-of-the-art digital signal processing technology. This advanced processing capability allows the device to analyze the acoustic characteristics of your room and adjust the audio output accordingly. By using sophisticated algorithms, the RCS 2.2X can correct frequency response deviations caused by room acoustics, ensuring that you experience your music exactly as the artist intended.

One of the standout features of the RCS 2.2X is its ability to provide customized room correction. Unlike many other systems that offer a one-size-fits-all solution, the RCS 2.2X tailors its corrections based on precise measurements taken from your specific listening environment. Utilizing a calibrated microphone, the system performs a series of measurements and graphically represents the room's acoustic challenges. This personalized approach results in a dramatically improved audio experience, with clearer highs, tighter bass, and a more immersive soundstage.

The RCS 2.2X supports high-resolution audio formats, including 24-bit/192kHz PCM, enhancing its compatibility with various digital sources. It features multiple digital and analog inputs, allowing for seamless integration into existing audio setups. This flexibility ensures that both modern and traditional audiophiles can benefit from the enhanced sound quality provided by this device.

In addition to its room correction capabilities, the RCS 2.2X boasts a powerful crossover function that enables users to create multi-channel audio setups with ease. This feature is particularly useful for home theater enthusiasts looking to optimize the performance of their surround sound systems.

Moreover, the RCS 2.2X includes an easy-to-use interface. It provides a user-friendly setup process, making it accessible even for those who may not be technically inclined. The ability to view real-time frequency response graphs further enhances user engagement and understanding of the acoustic adjustments being made.

In summary, the TacT Audio RCS 2.2X is a groundbreaking tool designed to elevate audio quality through advanced digital room correction technology. With its customizable corrections, high-resolution audio support, and versatile connectivity options, it stands out as a leader in the audio enhancement landscape. Whether you're a casual listener or a seasoned audiophile, the RCS 2.2X promises to redefine your listening experience, making every note and nuance resonate like never before.