TacT Audio Restoring Default Settings for Your TacT RCS 2.2X Amplifier

Step V:

Restoring the Default

RCS2.2X Settings

RCS 2.2X update complete

This step is optional and is only required if you would like to reset all internal settings in the unit to their factory defaults. If you proceed you will erase your custom user settings.

Restore the default settings for the new firmware installed on the RCS-2.2 X.

1 - From the TacT-2.2 X RCS software main screen, click on the “Options” menu selection at the top of the screen and then select the “Default Settings” option. You should now see the Default Settings window.

2 - Select the “Default” button and the default parameters for the RCS 2.2 X will be loaded into the RCS 2.2X. The RCS 2.2X will turn OFF and then ON and return to normal operation when finnished.

NOTE: If you have TacT digital amplifiers attached to the RCS-2.2 X you must set the “AMP” front panel general menu to “DISABLED”. The default settings will not be programed if these parameters are set to “ENABLED”.

You have now completed updating your RCS 2.2X and it is ready for normal operation.

Tact Audio 43