TacT Audio RCS 2.2X owner manual Front Panel Display Tone menu

Page 32

Front Panel Display

TONE menu

The tone menu allows for easy and very detailed system tonal control. Use the navigation buttons to highlight an option. To select the highlighted option press the “ENTER” button. To modify the selected option use the “UP” and “DOWN” naviga- tional buttons. To deselect the selected option press the “ENTER” button again.

1 - Level control is used to set the low, mid and high frequency filter attenuation. Filter level is given in dB and can be changed in increments of 0.1 dB. Maximum filter level is 12 dB and the minimum filter level is -12.0 dB.

2 - Frequency Control is used to set the cutoff frequency for the low and high frequency filters and to set the center frequency for mid (bandpass) filter.

3 - Q (Octave) control sets the filter bandwidth for the mid filter.

Note: An EQ preset must be enabled from the main screen for the PAR EQ and TONE menus to be active. If the EQ preset is set to “BP” the PAR EQ and TONE controls are disabled.

32 Tact Audio

Page 31 Page 33
Image 32
Page 31 Page 33
Contents RCS Blank Tact Audio Page Acknowledgments RegistrationTable of contents Accessories Operating voltage Unpacking the RCSIntroduction True Upgradeability Modular designRCS 2.2X Connections Digital input Digital output 1 main channels Tact AudioOptional modules RCS 2.2X Connections Digital outputSubwoofers RCS 2.2X Connections Analog input Microphone input RCS 2.2X Connections Analog outputOptional DAC module Ports AC mains input & mains switchRCS 2.2X Connections RS-232 interface Front panel controls Remote Control Volume Block Correction blockFront Panel Display Main screen Tact AudioTone controls are disabled SettingsFront Panel Display Correction menu option Saving MenuMono Mode menuStereo Assigned to each input independently DOUT-FS menuFront Panel Display POL menu Test menuFront Panel Display Display menu CRO menu Options menu AMP menu Attached to the RCSAnd/or daisy chain to link the components Can result in damage to your speakersMsec Front Panel Display Levels menuEnter button Front Panel Display Parametric EQ menu Front Panel Display Parametric EQ Table LinkedFront Panel Display Tone menu TacT 2.2X Room Correction Software Your computer system must meet the following requirementsComputer Connect yourRCS 2.2X to your Quick Setup Before You Begin Getting StartedQuick Setup SelectStep Step Step Update the RCS-2.2 X Firmware Update the Tact-2.2 X Firmware Status ReadyUpdate the Tact-2.2 X Firmware Tact Audio TacT Audio, Inc

RCS 2.2X specifications

TacT Audio, a pioneering name in the audiophile community, has made significant waves with its innovative product: the RCS 2.2X. This digital room correction system is designed to take your audio experience to a new level, making it a must-have for anyone serious about optimizing sound reproduction in their listening environment.

At the heart of the RCS 2.2X is its state-of-the-art digital signal processing technology. This advanced processing capability allows the device to analyze the acoustic characteristics of your room and adjust the audio output accordingly. By using sophisticated algorithms, the RCS 2.2X can correct frequency response deviations caused by room acoustics, ensuring that you experience your music exactly as the artist intended.

One of the standout features of the RCS 2.2X is its ability to provide customized room correction. Unlike many other systems that offer a one-size-fits-all solution, the RCS 2.2X tailors its corrections based on precise measurements taken from your specific listening environment. Utilizing a calibrated microphone, the system performs a series of measurements and graphically represents the room's acoustic challenges. This personalized approach results in a dramatically improved audio experience, with clearer highs, tighter bass, and a more immersive soundstage.

The RCS 2.2X supports high-resolution audio formats, including 24-bit/192kHz PCM, enhancing its compatibility with various digital sources. It features multiple digital and analog inputs, allowing for seamless integration into existing audio setups. This flexibility ensures that both modern and traditional audiophiles can benefit from the enhanced sound quality provided by this device.

In addition to its room correction capabilities, the RCS 2.2X boasts a powerful crossover function that enables users to create multi-channel audio setups with ease. This feature is particularly useful for home theater enthusiasts looking to optimize the performance of their surround sound systems.

Moreover, the RCS 2.2X includes an easy-to-use interface. It provides a user-friendly setup process, making it accessible even for those who may not be technically inclined. The ability to view real-time frequency response graphs further enhances user engagement and understanding of the acoustic adjustments being made.

In summary, the TacT Audio RCS 2.2X is a groundbreaking tool designed to elevate audio quality through advanced digital room correction technology. With its customizable corrections, high-resolution audio support, and versatile connectivity options, it stands out as a leader in the audio enhancement landscape. Whether you're a casual listener or a seasoned audiophile, the RCS 2.2X promises to redefine your listening experience, making every note and nuance resonate like never before.
Top Page Image Contents