![](/images/new-backgrounds/1017009/1700947x1.webp)
Front Panel Display
COMM menu The communication menu allows for the RS232 baud rate selection and device address assignment. By default the RCS 2.2X is set to baud rate of 57600.
| To change the system baud rate use the “UP” and “DOWN” navigational buttons to |
| highlight the desired baud rate and then press the “ENTER” button to select it. The |
| new baud rate will be displayed on the bottom of the screen. |
| To change the system device address highlight the “Address” option and then us- |
| ing the “LEFT” and “RIGHT” navigational buttons select the desired system ad- |
| dress. The RCS 2.2X is shipped with the default address set at 1. |
| NOTE: If you change the device address make sure that you select the ap- |
| propriate device address in the RCS 2.2X Room Correction software. |
CRO menu | The crossover menu offers five crossover selections options for use in bypass mode |
| only. Crossovers in correction mode are implemented into the correction filter via |
| the RCS software. To highlight an option use the “UP” and “DOWN” navigational |
| buttons. To make a selection press the “ENTER” button. The selected option will be |
| displayed on the top of the screen(1). |
When an option is selected the system will load the crossover filter and resume to normal operation. Crossover filters are user programmable from the Crossover screen in the Room Correction Software.
Crossover names are also user programmable from the Crossover screen in the RCS software. For crossover names you should choose symbolic names that somehow relate to the crossover filter characteristics.