Honeywell HRDE4X4 manual Initial Setup, Menu Structure

Initial Setup

Before using your DVR for the first time, you should establish some initial settings (for example, date and time, display language, camera settings, recording mode and scheduling, and your network setup). The following sections describe how to use the Setup menus to quickly set up your DVR.

1.Press SETUP on the front panel to enter the Setup menu.

2.At the prompt, enter your password using the appropriate combination of arrow buttons. The default password is 1111. Press SEL to enter the password.

3.After the password is entered you will see the main Setup menu screen as shown in Figure 3-2. Use the arrow buttons to navigate through the menu items. Press SEL to enter the desired sub-menu.

We recommend that you protect your DVR system by assigning a new password immediately. Please follow the procedure in Setting System Parameters, page 18.

Figure 3-2 Setup Menu Screen

Menu Structure

The Setup menu structure is as follows:

Setup Menu

Live	Record	System		Network		Storage	Save Setup
Channel	Motion Zone	DVR ID		Port
Name
	Schedule	Description		IP
		Admin Password		Gateway
		Network Password		Subnet Mask
		Set	Date & Time
				DNS Server IP
		PTZ	Control
					DDNS Server Name
				Mail Address
				Mail Server IP

Rev 2.00	13	Document 900.0399
		03/06