Honeywell HRDE4X4 manual Recording Mode

Table 3-3	Live Mode Setup Fields (Cont’d)
Field	Description
CONTRAST	Change the contrast value for the specified channel.
HUE	Change the hue value for the specified channel.
SATURATION	Change the saturation value for the specified channel.

Recording Mode

To set values for recording video, use the UP and DOWN controls to navigate through the menu items. Change the value of the menu item using the LEFT and RIGHT controls.

Figure 3-4 Recording Mode Setup Screen

Follow Table 3-4to set the Recording Mode parameters.

Table 3-4 Recording Mode Setup Fields

Field	Description
RESOLUTION	Set the resolution to either FULL Screen or QUAD View.
CHANNEL	Select the channel (camera 1–4) to apply the following settings on.
	Changes you make will immediately take effect with the selected channel.
FRAME RATE	Set the frame rate for the specified channel (choose from OFF or 1–30
	fps). The sum of the frame rate values from each channel cannot
	exceed the maximum frame rates for a specific recording resolution.
	The total Maximum frame rate for NTSC video are 120 Fps (frames per
	second) for Quad and 30 Fps for Full.
QUALITY	Select the recording quality for the specified channel. Options are:
	NORMAL
	HIGH
	SUPER

Rev 2.00	15	Document 900.0399
		03/06