Honeywell HRDE4X4 Admin, Password, Date Format, SET Date & Time, PTZ Control, Language, Remote

Table 3-6	System Setup Fields (Cont’d)
Field	Description
ADMIN	Set the administrator password. After selecting this menu item you
PASSWORD	will be prompted for your current password and then the new
	password. Follow the prompts to change and confirm the new
	password. The default password is 1111.
	Use the arrow controls to change the password:
	UP = 1
	RIGHT = 2
	DOWN = 3
	LEFT = 4
NETWORK	Set the remote access password. You will need to enter this
PASSWORD	password when connecting to this DVR through the RAS program
	(see page 42). After selecting this menu item you will be prompted
	for your current password (the default password is 1111) and then
	the new password. Follow the prompts to change and confirm the
	new password.
	Use the arrow controls to change the password as described in
	ADMIN PASSWORD above.
DATE FORMAT	Set the desired date and time display format. Options are:
	YYYY/MM/DD	YYYY-MM-DD
	MM/DD/YYYY	MM-DD-YYYY
	DD/MM/YYYY	DD-MM-YYYY
SET DATE & TIME	Set the present date and time for the DVR (see Figure 3-10).
	Press SEL, then use the LEFT and RIGHT arrow controls to navigate
	through the position of each alphanumeric character in the date and
	time. Use the UP and DOWN arrow controls to change the selected
	character. Press SEL to confirm the new date and time.
PTZ CONTROL	Set the PTZ camera speed, number, type, and ID (see Controlling a
	PTZ Camera, page 21).
LANGUAGE	Set the desired language.
REMOTE	Set from 0–9. Used with the unit optional remote control. If several
CONTROLLER ID	units are in the same room, set each unit for a different ID. Use the
	remote control to select one by pressing the corresponding single
	digit code. The factory default is set to 0. If only one unit is in the

room, leave this set to the factory default of 0. When set to 0, the unit does not look for a select number (1–9) from the remote control. The on-screen remote control icon will always be on and the user can press any remote control key as required.

Rev 2.00	19	Document 900.0399
		03/06