Honeywell HRDE4X4 manual Recording Schedules, Motion Zone Setup Screen

Page 25

Figure 3-5 Motion Zone Setup Screen

Selected zones

Note Only selected zones will trigger motion recording.

Recording Schedules

To set up a recording schedule, select SCHEDULE in the RECORD menu.

Use the arrow buttons to navigate through the items and set the recording schedule.

Figure 3-6 Recording Schedule Setup Screen

You can schedule recording in one hour increments from 0 to 24 (0:00 to 24:00). You can select individual blocks of time, blocks of time for all channels, entire channels, or the entire schedule. Motion recording, sensor recording and continuous recording can be used exclusively for the schedule, or mixed as needed. See Table 3-5for four ways to set the schedule.

To set up a recording schedule, select SCHEDULE in the record menu. Use the arrow buttons to select one of the items in Table 3-5. Then press SEL to toggle and select the recording method required (C = Continuous, M = Motion, S = Sensor, - = No recording).

Rev 2.00

17

Document 900.0399

 

 

03/06

Image 25
Contents Digital Video Recorder User Guide HRDE4X4Revisions Issue Date RevisionsFCC Compliance Statement Weee Waste Electrical and Electronic Equipment Contents Appendix a DVR Firmware Upgrade RAS ConfigurationAppendix D Specifications Figures Figure A-1 Engineering Mode Introduction FeaturesTechnical Overview Important Safeguards Dispose of used batteries according to the instructions Page Before You Begin DVR Unit InstallationUnpack Everything Setting Unit for Ntsc or PAL Typical DVR InstallationRear Panel Connections Connector Description Connecting Peripheral EquipmentSwitches AlarmOUT VideoConnecting the Power Cord Rev Document 03/06 Front Panel LEDs and Controls DVR ConfigurationUSB Port Menu Structure Initial SetupLive Mode Recording Mode Motion Zones Recording Schedules Motion Zone Setup ScreenSetting System Parameters Password AdminDate Format SET Date & TimeDVR ID Setup Screen Controlling a PTZ Camera Setting Network ParametersPort Remote AccessBandwidth SavingDdns Server Network Setup Fields Cont’dName Send E-MAIL Mail AddressDhcp Storage SetupOverwrite Storage Setup Fields DescriptionFormat 14 Save Setup Screen Saving SetupLive Viewing Window Front Panel OperationButton Functions in Live Viewing Window Search WindowButton Description Event Search Screen Event SearchEvent Search List Screen Time-Line SearchTime-line Search Screen Go To SearchGo Last Search Go First SearchLog List Search 10 Archive Search Screen Archive SearchPlay Mode Highlighted channel Network ModePress to launch the archiving function Archiving Images or Video onto the Hard Drive Archiving VideoTransferring Still Images or Video onto USB 15 Archive Menu Screen Rev Document 03/06 Installing the RAS Program RAS InstallationMinimum PC Requirements Choose Destination Location Live Viewing RAS OperationLive Viewing Interface Live Viewing Interface Controls Live Viewing Interface Controls Cont’d Search and Playback Interface Search and Playback ViewingInterface Control Description Search and Playback Interface Controls Search and Playback Interface Controls Cont’d Main User Interface with Back Up Times Marked Back Up a Video Clip in AVI FormatAVI Backup Window General Setup RAS ConfigurationEvent Setup Site SetupEvent Search Menu Event Search SetupRecord Menu Record Menu Settings Setting OperationVideo Menu Disk MenuAbout Menu Copy Firmware Upgrade to USB Stick DVR Firmware UpgradeStart Engineering Mode Verifying Software Installation Upgrading Using USB StickPlaying AVI Archive Clips Figure B-1 Ffdshow Video Decoder ConfigurationRev Document 03/06 Optional Items Remote Control OperationPress to select the remote unit Configuring Multiple Units for Remote ControlTable D-1 Technical Specifications Video SpecificationsConnectors Inputs, OutputsStorage Table D-1 Technical Specifications Cont’dGeneral Page Video Systems