Honeywell HRDE4X4 manual Live Mode

Live Mode

To set values for live video display, use the UP and DOWN controls to navigate through the menu items. Change the value of the menu item using the LEFT and RIGHT controls.

Figure 3-3 Live Mode Setup Screen

Follow Table 3-3to set the Live Mode parameters.

Table 3-3 Live Mode Setup Fields

Field	Description
OSD	Enable/disable on-screen display.
SEQUENCE	Enable/disable sequential display of video in Full Screen mode.
SEQ-DWELL TIME	Set the Dwell time for each channel display in Sequential Display
	mode (choose from 1–60seconds).
SCREEN	Enable/disable cropping to make the display fit the screen.
CROPPING
TRANSPARENT	Change the transparency level of the on-screen display.
CHANNEL	Select the channel (camera 1–4) for applying the six following
	settings. Any changes you make will immediately take effect with
	the selected channel.
	Press SEL to enter a text insertion screen and apply a new name
	for the channel. Use the LEFT and RIGHT arrow controls to
	navigate through the channel name and the UP and DOWN arrow
	controls to change the selected character. Press SEL to confirm
	the name.
DISPLAY	Enable/disable display of the video channel in Live Display mode.
SEQ LIST	Enable/disable the specified channel to be included in the
	Sequential Display mode.
BRIGHTNESS	Change the brightness value for the specified channel.
Rev 2.00	14	Document 900.0399
		03/06