Honeywell HRDE4X4 manual Event Search Screen

Figure 4-2 Search Menu

Event Search

The EVENT SEARCH window (see Figure 4-3) is used to find stored video. Three categories of search filters can be applied: DATE, CHANNEL and TYPE. Press SEL to select a value and move down to the next category and use the UP arrow button to move up to the categories you have previously entered. The ESC button will return the user to the previous screen.

Searching for an event:

1.Select the date of the video to begin searching. Use the LEFT, RIGHT, UP and DOWN buttons to navigate through the days.

2.Once you have selected the date, press SEL to move to the CHANNEL selector.

3.Use the LEFT and RIGHT buttons to change the channel selection from ALL to any of the four available channels.

4.Once you have selected the channel, press SEL to move to the TYPE selector.

5.Use the LEFT and RIGHT buttons to change the type of recording to ALL, MOTION, SENSOR, MANUAL, or CONTINUOUS.

6.Once you have selected the type of recording to search for, press SEL to produce a list of instances that fit your search criteria.

Figure 4-3 Event Search Screen

Rev 2.00	29	Document 900.0399
		03/06