Antunes, AJ owner manual SE-4200/4400 WATER FILTRATION SYSTEM, OPERATION continued

SE-4200/4400 WATER FILTRATION SYSTEM

OPERATION (continued)

NOTE: The REVIEW HISTORY mode displays infor- mation about the most recent operation first.

5.When finished reviewing history, press the Enter button. The system will display the REVIEW OF CYCLES display. Press Menu to return to STOP MODE.

6.Press the Run button to return to FILTER MODE.

INTERNAL TESTS MODE

1.From the FILTER MODE display, press the Stop button. The system displays the STOP MODE dis- play.

2.Press the Menu button.

3.Using the Up and Down arrow buttons, scroll from SET PASSWORD to INTERNAL TESTS and press the Enter button.

4.In this mode, valve, sensor, and alarm status can be viewed and changed. Use the Up and Down arrow buttons to view the different settings. Use the Left and Right arrow buttons to toggle different options on and off.

IMPORTANT

This feature is ONLY to be used for servicing the system or to diagnose problems.

5.To exit this mode, press the Menu button. The system will display the INTERNAL TESTS display. Press the Menu button to return to the STOP MODE display.

5.The system displays the SET ENABLE PASSWORD display. The default setting is off. If you do not want to use a password, press the Enter but- ton. The system will then display the SELECT LANGUAGE display. The default setting is English (other languages are not available at this time). Press the Enter button to accept the default.

6.The system displays the SET PASSWORD display. From this display, you can press the Menu button to exit this mode. If you DO choose to set a pass- word, follow these steps.

a.Press the Enter button, use the Left and Right arrow buttons to change the setting to on, and press the Enter button.

b.The system displays the SET NEW PASSWORD? prompt. The default value is off. Use the Left and Right arrow buttons to switch the value to on, and press the Enter button.

c.The system then displays the ENTER NEW PASSWORD prompt.

NOTE: Passwords are limited to 4 alpha-numeric characters. Think of a password that is easy for you to remember but difficult for others to guess. Write your password down and store it in a safe location.

d. Use the Up and Down arrow buttons to enter each character of your password. When the character is correct, press Enter to move to the next character. When finished, press the Enter button.

6. Press the Run button to return to FILTER MODE.

SET PASSWORD MODE

e. The system displays the RE-ENTER PASSWORD display. Enter your new password again as described above.

NOTE: A password does NOT need to be set for	f. The system will then display the PROTECT
proper operation of the system. The password	KEYS display. The default value is off. Accept
function should ONLY be used to protect the time,	this setting with the default value by pressing
flush, and feature settings from being changed.	Enter.
After setting a password, that password MUST be	NOTE: Do not set the PROTECT KEYS function to
used before accessing any Menu features.
	“on.” Contact the manufacturer for instructions on
1. From the FILTER MODE display, press the Stop	using this function.
button. The system displays the STOP MODE dis-	g. The system then returns to the SET LANGUAGE
play.
	display. Press the Enter button to return to the
2. Press the Menu button.	SET PASSWORD display. Then, press the Menu
3. If not already displayed, use the Up and Down	button to return to STOP MODE. Press the
	Run Button to return to FILTER MODE.
arrow buttons to scroll to SET PASSWORD, and
press the Enter button.
14	P/N 1010852 Rev. C 04/06