Service/Technical Assistance
If you experience any problems with the installation or operation of your unit, contact Antunes Filtration Technologies at
Fill in the information in the next column and have it handy when calling for assistance. The serial number is on the specification plate on the unit.
Purchased From:
Date of Purchase:
Model No.:
Serial No.:
Mfg. No.:
IMPORTANT
A.J. Antunes & Co. reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions, or replacements for previously purchased equipment.
IMPORTANT SAFETY INFORMATION
Throughout this manual, you will find the following safety words and symbols that signify important safety issues with regards to operating or maintaining the equipment.
WARNING
GENERAL WARNING. Indicates informa- tion important to the proper operation of the equipment. Failure to observe may result in damage to the equipment and/or severe bodily injury or death.
CAUTION
GENERAL CAUTION. Indicates informa- tion important to the proper operation of the equipment. Failure to observe may result in damage to the equipment.
WARNING
ELECTRICAL WARNING. Indicates infor- mation relating to possible shock hazard. Failure to observe may result in damage to the equipment and/or severe bodily injury or death.
In addition to the warnings and cautions in this manual, use the following guidelines for safe operation of the unit.
•Read all instructions before using equipment.
•For your safety, the equipment is furnished with a properly grounded cord connector. Do not attempt to defeat the grounded connector.
•Install or locate the equipment only for its intend- ed use as described in this manual. Do not use corrosive chemicals in this equipment.
•Do not operate this equipment if it has a dam- aged cord or plug, if it is not working properly, or if it has been damaged or dropped.
•This equipment should be serviced by qualified personnel only. Contact the nearest Authorized Service Agency for adjustment or repair.
•Do not block or cover any openings on the unit.
•Do not immerse cord or plug in water.
•Keep cord away from heated surfaces.
•Do not allow cord to hang over edge of table or counter.
P/N 1010852 Rev. C 04/06 | 3 |