Extron electronic DVS 406 D, DVS 406 AD manual Serial Communication, cont’d

Serial Communication, cont’d

Command/response table for SIS commands

Command	ASCII Command	Response	Additional description
	(host to scaler)	(scaler to host)
Input selection

Select both video and audio	X1	!	Cxx	X1
Example:	3!		Cxx3
Select audio only	X1	$	Axx	X1
Select video only	X1	&	Vxx	X1

Video & audio input X1 . Example: select input 3 video & audio Audio input X1 .

Video input X1 .

Take

Switch to selected audio & video	%	Tke0	Switch to selected audio & video
inputs			inputs.
Switch to selected video only	1%	Tke1	Switch to selected video input.
Switch to selected audio only	2%	Tke2	Switch to selected audio input.

Memory preset

Recall input configuration preset Save input configuration preset

X19	.	Rpre	X19	Recall input preset	X19		.
	,	Spre		Save to input preset				.
X19			X19			X19

Audio gain/attenuation

Set audio gain	X6	G	Aud=	X9	Set a single input’s gain (in dB).
Example:	9G		Aud=+9.0		Example: set gain to +9 dB.
Set audio attenuation		g	Aud=		Set an input’s attenuation (in dB).
	X7			X9
Example:	8g		Aud=-8.0		Example: set attenuation to -8 dB.
View audio channel level	G		Aud=		Show an input’s audio level.
				X9

Audio mute

Mute on	1Z	Amt X2
Example:	1Z	Amt1
Mute off	0Z	Amt	X2
View audio mute status	Z	Amt	X2

Mute both audio outputs.

Unmute all audio outputs. Show the status of audio mute.

Video mute

Mute on	1B	Vmt X2		Mute video output.
Example:	1B	Vmt1
Mute off	0B	Vmt	X2	Unmute video output.
View video mute status	B	Vmt	X2	Show the status of video mute.

Video/audio mute

Mute on	1B1Z	Vmt X2		Amt X2
Example:	1B1Z	Vmt1		Amt1
Mute off	0B0Z	Vmt	X2	Amt X2
View video/audio mute status	BZ	Vmt	X2	Amt X2

Mute video & audio output.

Unmute video & audio output. Show video/audio mute status.

Video configuration

Set video signal type	X1 * X4 \	X1	Typ X4
Example:	2*4\	2Typ4
View the video signal type	X1 \	X1	Typ X4
Example:	5\	5Typ1

Set the input signal type. (Type =

RGB, YUV, RGBcS, YUVi, YUVp, video,

S-video, or SDI)

Example: set input 2 to 4 (YUVi). Show the video signal type. Example: show input 5 video type.

Color

Set a specific color value	X10	C	Col	X10	Specify a color adjustment level.
Example:	47C		Col047		Example: set the color adjustment to 47.
Increment	+C		Col		Increase color adjustment level.
				X10

3-4 DVS 406 • Serial Communication